QUICK REF  NAV BAR

Infinity Turbine Waste Heat To Power - Organic Rankine Cycle

TEL:  (720) 541-9113       

Sales and Email: greg@infinityturbine.com

NAV BAR

• Producing The World's Smallest Supercritical CO2 Rankine Cycle Demonstrator

• Use 95 Percent Of The World's Available Waste Heat For Fuel Source

Maker Space Plans Download: Magnetic Coupling | Tesla Valve | Coil | Turbines

Bitcoin Mining (Blockchain) Using Waste Heat To Energy for Low Cost Power

TriboElectric Power - No Moving Parts

Videos of our technology

Graphene Fast Filter

• Turbine Generator Plans (free download): ROT06  |  ROT15  |  ROT20  |  ROT24

• Developed System Plans: IT10  | IT50  |  IT100  |  IT250

• Industrial | Hot Geothermal | Solar | Data Center | Tribo | Compressor

• Developed Systems: IT10  • IT50  •  IT100  •  IT250

Maker Space 

Plans Download  

(License for personal use only)

DIY DC Generator Coil Design Platform - Test Your Coil Designs 

 

This is a 3D printable design, that allows you to place magnets (buy from Amazon) and tape them into the center cylinder. A simple electric outrunner motor is housed within the cylinder to spin the part. On the end, a standard bearing supports the cylinder, while the motor bearing supports the motor end. Then center part is for placement of your own coil design. You can mount the assembly to a plywood board as a base. These drawings are provided free of charge, but may only be downloaded from this site. All drawings have copyrights, and my not be re-distributed. Have fun learning and experimenting with generator coil designs. Send us photos of your project and we’ll post.

Radial Outflow Turbine ROT 6 

 

Infinity Turbine LLC has developed and fabricated many smaller turbine designs. One of those designs was our ROT Radial Outflow Turbine with a 6 inch diameter (ROT06). The ROT06 can drive (depending on pressure) a 1-5 kW generator. We have tested the ROT06 on compressed air of only 80 psi and was able to get up to half of our resistance light board lighted (there are 5x 200 watt lights per row and up to 10 rows of lights). The turbine design is unique in that it uses the generator shaft and bearings for support, and a simple pipe with Gruvlok or Victualic couplings to seal in the pressure. The flat end plates (discs) are easily waterjet or machined out of aluminum or stainless steel. If you are using CO2 or water/steam for the working fluid, we suggest more durable bearings that will tolerate the pressurized environment. You can also use a shaft seal to isolate the turbine section, and put the DC or AC generator outside, which does not require any special bearing lubrication that is tolerant to the inside turbine working fluid.

ROT06 Assembly

Plans Download: 

ROT06 for download and use for personal use only. Any other build licensing options, please contact Infinity.

 

ROT 06 Plans Download (10.5 MB ZIP File): 

 

http://www.infinityturbine.com/plans/rot06/20180129-infinity-turbine-rot06-cad.zip

Infinity Turbine ROT06 DC Generator Rotor
ROT06 Turbine Rotor Infinity Turbine
ROT Turbine Rotor Infinity Turbine

Plans Download: 

Download and use for personal use only. Any other build licensing options, please contact Infinity.

 

ROT 15 Plans Download (18.9 MB ZIP File): 

 

http://www.infinityturbine.com/plans/rot15/20180130-infinity-turbine-rot15-cad.zip

ROT15 Turbine AC Generator

Radial Outflow Turbine ROT 15 

 

Infinity Turbine LLC has developed and fabricated many turbine designs. One of those designs was our ROT Radial Outflow Turbine with a 15 inch diameter (ROT15). The ROT15 can drive (depending on pressure) a 10-50 kW generator. If an induction AC motor/generator is used, you will need a grid tie device. This design is for 300 psi or lower working pressures. With enhanced material design, or vessel strength, and generator designs which can withstand higher temperatures and pressures, you can use higher pressures. The blueprints offered, are only for the turbine (the generator you purchase separately) and assembly of the turbine generator. System plans for a complete ORC Organic Rankine Cycle System are sold separately, and include the evaporator/condenser heat exchangers, feedpump, PLC Control, piping, valves, VFD, frame, and system components.

Radial Outflow Turbine ROT 24 

 

Infinity Turbine LLC has developed and fabricated many turbine designs. One of those designs was our ROT Radial Outflow Turbine with a 24 inch diameter (ROT24). The turbine can drive (depending on pressure) a 50-100 kW generator. If a induction motor/generator is used, you will need to install a grid-tie device. This design is for 300 psi or lower working pressures. With enhanced material design, or vessel strength, and generator designs which can withstand higher temperatures and pressures, you can use higher pressures. The blueprints offered, are only for the turbine (the generator you purchase separately) and assembly of the turbine generator. System plans for a complete ORC Organic Rankine Cycle System are sold separately, and include the evaporator/condenser heat exchangers, feedpump, PLC Control, piping, valves, VFD, frame, and system components.

ROT06 Turbine Rotor Infinity Turbine

Plans Download: 

Download and use for personal use only. Any other build licensing options, please contact Infinity.

 

ROT 24 Plans Download (41.1 MB ZIP File): 

http://www.infinityturbine.com/plans/rot24/20180131-infinity-turbine-rot24-cad.zip 

 

ROT 23 Plans Haas Version Download (13 MB ZIP file): 

http://www.infinityturbine.com/plans/rot24-haas-version/20180219-infinity-turbine-rot24-haas.zip

ROT24 Assembly

Magnetic Reduction Coupling 

 

Infinity Turbine LLC has developed and fabricated a basic proof-of-concept magnetic reduction coupling. The 2:1 ratio (non-contact) magnetic prototype worked (see video on Vimeo site). Note: if the magnetic pull between the two separate shaft is broken, it may reconnect, or the two separate shafts may not reconnect, and develop a Eddy current (heat).

Plans Download: 

Download and use for personal use only. Any other build licensing options, please contact Infinity.

 

MRC Plans Download (24.6 MB ZIP File): 

http://www.infinityturbine.com/plans/mrc/20180201-infinity-turbine-mrc-cad.zip

Tesla One Way Valve – VALVULAR CONDUIT – US Patent US1329559A 

 

Infinity Turbine LLC has drawn (CAD/CAM) of the Tesla one-way valve. As you can see from the CFD (computational flow), it’s not quite purely a one-way valve, but a brilliant design all the same.

Plans Download: 

Download and use for personal use only. Any other build licensing options, please contact Infinity.

 

Tesla Plans Download (36.3 MB ZIP File): 

http://www.infinityturbine.com/plans/tesla-one-way-valve/20180202-infinity-turbine-tesla-valve-cad.zip

Magnetic Coupling - Motor to Pump Drive 

 

Infinity Turbine LLC has drawn a magnetic drive assembly, which magnetically connects a motor to a pump (non-contact).

Plans Download: 

Download and use for personal use only. Any other build licensing options, please contact Infinity.

 

Plans Download (9.6 MB ZIP File): 

http://www.infinityturbine.com/plans/mag-coupling/20180205-infinity-turbine-mag-coupling-cad.zip

Caster Beam - Modular Frame Building System 

Have you ever wanted a off-the-shelf solution for building modular frames ? Infinity has developed a modular steel beam frame system that has laser cut caster bolt patterns, and 3 inch access ports, for rapid prototyping, building mobile structures, and completely reusable elements. Standard 24 and 48 inch beams attach with standard 3/8 inch bolts and brackets when bolted together, make a frame that fits through any standard doorway, hallway, or elevator. No welding necessary. Makes frames for prototypes, workbenches, desks, etc.

Plans Download: 

Download and use for personal use only. Any other build licensing options, please contact Infinity.

 

Plans Download (271.7 MB ZIP File): 

http://www.infinityturbine.com/plans/caster-beam/20180206-infinity-turbine-caster-beam.zip

IT10 Turbine - Radial Design - ORC - Organic Rankine Cycle 

 

Infinity Turbine LLC IT10 Turbine Generator drawings. This turbine is used in our IT10 system and can generate 5-10 kW DC power utilizing low grade heat (solar, geothermal, industrial waste heat). Compressed air, R134a, and R245fa. Up to 300 psi.

Plans Download: 

Download and use for personal use only. Any other build licensing options, please contact Infinity.

 

Plans Download (26.6 MB ZIP File): 

http://www.infinityturbine.com/plans/it10xr/20180207-infinity-turbine-it10xr-turbine.zip

ITMini Turbine - New Design - ORC - Organic Rankine Cycle - Compressed Air 

 

Infinity Turbine LLC ITmini Turbine Generator drawings. This turbine was a experimental prototype using a novel expander. The turbine generator uses the modular block concept.

Plans Download: 

Download and use for personal use only. Any other build licensing options, please contact Infinity.

 

Plans Download (12.1 MB ZIP File): 

http://www.infinityturbine.com/plans/itmini/20180208-infinity-turbine-itmini.zip

Caster Bracket 

 

Infinity Turbine LLC caster bracket drawings. This bracket will fit any standard sized 5 inch diameter fixed or swivel caster. Makes attaching easy. We use them for mounting onto carts for mobile storage. Was the first stage design which later become the caster beam.

Plans Download: 

Download and use for personal use only. Any other build licensing options, please contact Infinity.

 

Plans Download (947 KB ZIP File): 

http://www.infinityturbine.com/plans/castor-bracket/20180208-infinity-turbine-caster-bracket.zip

2013 Infinity ITmicro Radial Turbine 

 

Infinity Turbine LLC modular block ITmicro Radial Turbine.

Plans Download: 

Download and use for personal use only. Any other build licensing options, please contact Infinity.

 

Plans Download (18.5 MB ZIP File): 

http://www.infinityturbine.com/plans/itmicro-radial-turbine/20180212-infinity-turbine-itmicro-radial-turbine.zip

2013 Infinity Turbine IT250 Radial Turbine 

 

Infinity Turbine LLC IT250 Radial Turbine.

Plans Download: 

Download and use for personal use only. Any other build licensing options, please contact Infinity.

 

Plans Download (82.3 MB ZIP File): 

http://www.infinityturbine.com/plans/it250-radial-turbine/20180213-infinity-turbine-it250-radial-turbine.zip

2013 Infinity Turbine Heat Exchanger 3D 

Infinity Turbine LLC Heat Exchanger.

Plans Download: 

Download and use for personal use only. Any other build licensing options, please contact Infinity.

 

Plans Download (5.7 MB ZIP File): 

http://www.infinityturbine.com/plans/heat-exchanger-3d/20180214-infinity-turbine-heat-exchanger-3d.zip

Infinity Turbine Haas Tooling Jig 

Infinity Turbine LLC Haas Tooling Jig for 4th Axis and Rotary Attachment.

Plans Download: 

Download and use for personal use only. Any other build licensing options, please contact Infinity.

 

Plans Download (14.4 MB ZIP File): 

http://www.infinityturbine.com/plans/haas-4th-axis-tooling/20180215-infinity-turbine-haas-tooling-jig.zip

Infinity Turbine ITxr Radial Turbine Generator 

Infinity Turbine LLC ITxr Radial Turbine Generator.

Plans Download: 

Download and use for personal use only. Any other build licensing options, please contact Infinity.

 

Plans Download (26.6 MB ZIP File): 

http://www.infinityturbine.com/plans/itxr-radial-turbine/20180216-infinity-turbine-itxr.zip

Infinity Turbine IT  Axial Turbine Generator 

Infinity Turbine LLC IT Axial Radial Turbine Generator.

Plans Download: 

Download and use for personal use only. Any other build licensing options, please contact Infinity.

 

Plans Download (20.3 MB ZIP File): 

http://www.infinityturbine.com/plans/it10-axial/20180216-infinity-turbine-itaxial.zip

Infinity Turbine and Global Energy Modular Block 

Infinity Turbine LLC and Global Energy Modular Block (Patented)

Plans Download: 

Download and use for personal use only. Any other build licensing options, please contact Infinity.

 

Plans Download (44 MB ZIP File): 

http://www.infinityturbine.com/plans/modular-block/20180218-infinity-turbine-modular-block.zip

Infinity Turbine IT12 Waterjet Version 12 inch Impulse Turbine Generator 

Infinity Turbine LLC IT12 Impulse Turbine Generator.

Plans Download: 

Download and use for personal use only. Any other build licensing options, please contact Infinity.

 

Plans Download (3.6 MB ZIP File): 

http://www.infinityturbine.com/plans/it12wj/20180221-infinity-turbine-it12wj-turbine.zip

Infinity Turbine IT12 Waterjet Version 12 inch Impulse Turbine Generator 

Infinity Turbine LLC IT12 Impulse Turbine Generator.

Plans Download: 

Download and use for personal use only. Any other build licensing options, please contact Infinity.

 

AmpFlow DC Gen Version Plans Download (14.6 MB ZIP File): 

http://www.infinityturbine.com/plans/coni-turbine/2018022-infinity-turbine-coni-ampflow.zip 

 

100cc Rotomax DC Gen VersionPlans Download (17.4 MB ZIP File): 

http://www.infinityturbine.com/plans/coni-turbine/2018022-infinity-turbine-coni-rotomax-100cc.zip