TEL: (720) 541-9113
Sales and Email: email@example.com
ROT06 Turbine Generator Plans • Blueprints
Price: $1,999 USD
Includes Turbine and IT10 System Plans
Infinity Turbine LLC has developed and fabricated many smaller turbine designs.
One of those designs was our ROT Radial Outflow Turbine with a 6 inch diameter (ROT06). The ROT06 can drive (depending on pressure) a 1-5 kW generator. We have tested the ROT06 on compressed air of only 80 psi and was able to get up to half of our resistence light board lighted (there are 5x 200 watt lights per row and up to 10 rows of lights). The turbine design is unique in that it uses the generator shaft and bearings for support, and a simple pipe with Gruvlok or Victualic couplings to seal in the pressure. The flat end plates (discs) are easily waterjet or machined out of aluminum or stainless steel. If you are using CO2 or water/steam for the working fluid, we suggest more durable bearings that will tolerate the pressurized environment. You can also use a shaft seal to isolate the turbine section, and put the DC or AC generator outside, which does not require any special bearing lubrication that is tolerant to the inside turbine working fluid.
Price with unlimited production license: $1,999 USD.
IT10 System plans with unlimited production license: $9,000 USD.
The plans include images of each component in (jpg/png) and .pdf views.
The machine ready files include dwg, dxf, xt and we can provide other files on request from our AutoDesk suite of Cad/Cam software.
The files are provided by a FTP download.
The license is for the turbine blueprints only, and does not include any support (optional).
If you would like system blueprints (bill of materials, heat exchangers, pump/motor, frame, piping, etc.) for our Supercritical CO2 or standard R245fa, or R134a, please contact Infinity.