PDF Publication Title:
Text from PDF Page: 012
344 Southern California Edison System with very low levels of pollutants by using both low-sulfur and medium-sulfur coals. The Cool Water demonstration plant shown in Figure 9.10 (named after the ranch on which it is located) utilized a coal gasification technique known as the Texaco process. The medium-heating-value synthetic gas called syngas produced by the process has about one-third the heating value of natural gas, about 265 Btu per standard cubic foot on a dry basis. As it is produced, the syngas is first cooled, then treated to remove pollutants, and finally burned to drive turbine generators, as seen in Figure 9.11. The initial cooling in the syngas coolers produces saturated steam,which is later superheated by gas turbine exhaust gas in an HRSG, to power a steam turbine (path A in the diagram). The syngas emerging from the coolers (path B) is processed to remove particulates and sulfur and to control oxides of nitrogen, and is then burned in the gas turbine to produce additional power. The high-temperature gas turbine exhaust (path C) then passes through the heat-recovery steam generator, adding energy to the steam before it passes to the steam turbine. Thus the gasifier flows and the steam turbine and gas turbine flows interact, hence the name “integrated gasification combined cycle,” IGCC. The Texaco process requires oxygen of at least 95% purity to gasify the coal in the gasifier. The Cool Water plant thus has a small, independently owned oxygen plant (seen surrounding the single tower left of center in figure 9.10) that separatesPDF Image | Advanced Systems Steam Power Plant
PDF Search Title:
Advanced Systems Steam Power PlantOriginal File Name Searched:
advanced-systems-steam-turbine.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)