PDF Publication Title:
Text from PDF Page: 122
performance parameters such as blade surface temperature, rotor inlet temperature distribution, total pressure loss, and total power generation are compared between different configurations to evaluate them. Finally, the pros and cons of each approach are discussed and the best method for controlling the blade surface temperature in UHEGT is designated. Figure 62 shows the numerical domain used for CFD simulation in the first scenario presented by configuration 1. In this configuration, four injectors are uniformly distributed in front of each stator blade in the circumferential direction. The circumferential location of the injectors relative to the stator blade has not been taken into consideration in this case. In configuration 2, which is designed based on the results of configuration 1, one of the injectors that is located right in front the stator LE is removed. The remaining three injectors are circumferentially distributed between the two adjacent blades while keeping a certain circumferential distance between the injectors and the blade LE (about 0.5 degrees on each side). In configuration 3, four injectors are distributed between the two adjacent blades while still keeping a certain circumferential distance between the injectors and the blade LE. The corresponding positioning of the injectors will be further discussed in the RESULTS AND DISCUSSION section with additional details and figures. Configuration 4 uses a different approach in reducing the blade surface temperature and that is film cooling. As shown in Figure 63, one set of film cooling is applied to the blade leading edge along with three sets of cooling holes on each suction 100PDF Image | DEVELOPMENT OF AN ULTRA-HIGH EFFICIENCY GAS TURBINE ENGINE (UHEGT
PDF Search Title:
DEVELOPMENT OF AN ULTRA-HIGH EFFICIENCY GAS TURBINE ENGINE (UHEGTOriginal File Name Searched:
Thesis-high-efficiency-gas-turbine.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)