PDF Publication Title:
Text from PDF Page: 051
account of the actual work that can be achieved from a generator in a practical time interval. It is given by P =VIdt t (17) ave where V is the voltage across the applied load, I is the current flowing through it, and Δt is the length of selected time interval. Recently Zi et al. proposed a set of figure of merits for standardizing TENG72 as well as a rationally designed charging cycle using TENG,96 both of which emphasized the significance of voltage V and transferred charge Q, or the voltage- charge transfer (V-Q) plot, on the evaluation and maximization of TENG performance. Therefore, it makes sense to expressing the power equation using V and Q by substituting Idt with dQ, P =VdQt ave (18) According to both Equation 17 and 18, the length of time interval Δt is a very critical parameter that would greatly affect the validity of calculated average power as well as the amount of required computational efforts. If Δt is too short, the interval would not be adequate to give a reliable estimate of the long-term performance of the TENG; if it is too long, the process of experimental measurement and data analysis would be inefficient. The most straightforward choice of Δt is the period of the electrical output. However, as seen in Figure 10, the outputs of both SR-TENG and MA-TENG under ambient vibration are not periodic from cycle to cycle. Figure 12a and Figure 12b plot typical V-Q characteristics of SR-TENG under 3.5 Hz vibration and MA-TENG under 2.5 Hz vibration 37PDF Image | HIGH PERFORMANCE TRIBOELECTRIC NANOGENERATOR AND ITS APPLICATIONS
PDF Search Title:
HIGH PERFORMANCE TRIBOELECTRIC NANOGENERATOR AND ITS APPLICATIONSOriginal File Name Searched:
WU-DISSERTATION-2019.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)