PDF Publication Title:
Text from PDF Page: 087
then submerged into a room-temperature water bath for 15 mins, followed by peeling off the entire film from each glass substrate. 2.4.5.6 Mechanical Testing of PPHA and PPHA-Ag Films Mechanical properties of PPHA and PPHA-Ag films were characterized using TA Instrument Q800 Dynamic Mechanical Analyzer. Samples had dimension of 11 mm ×7 mm ×0.1 mm (length ×width ×thickness). Stress-strain curves of samples were measured at 23 °C with a preload force of 0.015 N and were elongated with a constant force ramp rate of 1 N/min until sample-failure occurred, as shown in Figure S1. Young’s modulus [MPa], strain to break value [%], and yield stress [MPa] were obtained from the stress- strain curve. The ability of a material to absorb energy without fracturing is represented by modulus of resilience [J/m3], which was calculated as Modulus of Resilience = Yield Stress2 2(Young's Modulus) 2.4.5.7 Thermal Stability Measurement of PPHA-Ag Film (19) Thermogravimatric analysis (TGA) was performed using a TA Instrument Q50 under inert nitrogen condition with a constant flow rate of 40 ml/min. Weight of 6.112 mg PPHA-Ag film was loaded into the TGA furnace and investigated for its thermal stability. Furnace temperature was ramped at 5 °C/min to 250 °C. Figure S2 shows the weight fraction change of the loaded film with the ramping of temperature. The onset decomposition of the film happened at 113 °C. About 50% residual weight was leftover, due to the residual Ag NWs and non-volatile BMP TFSI. 73PDF Image | HIGH PERFORMANCE TRIBOELECTRIC NANOGENERATOR AND ITS APPLICATIONS
PDF Search Title:
HIGH PERFORMANCE TRIBOELECTRIC NANOGENERATOR AND ITS APPLICATIONSOriginal File Name Searched:
WU-DISSERTATION-2019.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)