PDF Publication Title:
Text from PDF Page: 169
the peak voltage achieved here (Figure 58b). With a larger sliding area of 9.5 cm ×10 cm, the peak voltage generated by the TENG could be pushed to be over 3000 V (Figure 58b), and the measured V-I curve (Figure 58c) was still consistent with the previously measured ones. This result indicates that the emitter was kept intact under the TENG-HV supply. In fact, even in the worst situation that a short circuit occurs, the safety would not be a concern for systems driven by TENG given its limited charge density.150 Figure 58. Merits of using TENG as HV source for field emission of electrons. (a-c) The safety test of the emitter under DC-HV and the TENG-HV. (a) The current through the emitter with gradually increased DC voltage until ~280 V. The insets show the exfoliated ZnO film with NWs after test. Scale bars: 100 μm. (b) The measurement of TENG-HV through a partial voltage measurement circuit. (c) The measured V-I curve after TENG-HV test, which is consistent with the previously measured curves. (d-f) Continuous unidirectional tribo-field emission output. (d) Equivalent electrical circuits. (e) voltage and (f) current output achieved with a 10 nF capacitor under various frequencies. Reproduced with permission.216 Copyright 2018, Elsevier. 5.3.3 Controllability of Using TENG as HV Source Given that a continuous unidirectional output of field emission is usually preferred for most applications, relatively stable voltage for tribo-field emission is achieved via a 155PDF Image | HIGH PERFORMANCE TRIBOELECTRIC NANOGENERATOR AND ITS APPLICATIONS
PDF Search Title:
HIGH PERFORMANCE TRIBOELECTRIC NANOGENERATOR AND ITS APPLICATIONSOriginal File Name Searched:
WU-DISSERTATION-2019.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)