logo

TRIBOLOGY OF POLYMERIC COATINGS FOR AGGRESSIVE BEARING APPLICATIONS

PDF Publication Title:

TRIBOLOGY OF POLYMERIC COATINGS FOR AGGRESSIVE BEARING APPLICATIONS ( tribology-polymeric-coatings-for-aggressive-bearing-applicat )

Previous Page View | Next Page View | Return to Search List

Text from PDF Page: 037

force is needed to generate more wear particles. At some point, the amount of wear debris generated is sufficient to act as a solid lubricant, thus preventing further wear of the coating, which results in steady-state behavior. This friction coefficient behavior was similar for all coatings, even though their absolute values were different (as it will be discussed later). In regards to the near contact temperature behavior, it quickly increased from room temperature (at the start of the test) to about 45°C during the first 1 min, and then followed the same trend as the friction coefficient. 0.50 (a) T est-1 T est-2 0.25 0.00 0 10 20 30 100 (b) 50 Temp.(oC) COF 0 0 10 20 30 Time (min) Figure 3.4 In-situ (a) friction coefficient and (b) near contact temperature of PTFE/MoS2 coating during 30 min oscillatory testing. The sharp transients, especially in the friction data are electrical noise as the data is unfiltered. Typical profilometric wear track measurements of the 4 coatings tested under dry- oscillatory conditions are shown in Figure 3.5. The wear track profiles of the other three coatings under the same testing conditions can be found in Ref. Demas and Polycarpou (2008). Due to relatively high contact pressure (450 MPa) in this condition, wear of the coatings was observed for all coatings. Among the 4 coatings shown in Figure 3.5, T est-1 T est-2 31

PDF Image | TRIBOLOGY OF POLYMERIC COATINGS FOR AGGRESSIVE BEARING APPLICATIONS

tribology-polymeric-coatings-for-aggressive-bearing-applicat-037

PDF Search Title:

TRIBOLOGY OF POLYMERIC COATINGS FOR AGGRESSIVE BEARING APPLICATIONS

Original File Name Searched:

thesis-tribology.pdf

DIY PDF Search: Google It | Yahoo | Bing

NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info

IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info

Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info

Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info

Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info

NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info

Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info

CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP