PDF Publication Title:
Text from PDF Page: 086
typical hard coatings such as diamond-like-carbon (DLC) and WC/C with a thickness of 2.5 μm (Solzak and Polycarpou, 2010). The RMS roughness of each coating was measured using a stylus profilometer (Tencor P-15TM) and found to be in the range of 0.61~2.28 μm. 5.2.2 (a) Tribological testing Gray Cast Iron (b) Disk (coated) Normal load 52100 Steel Shoe Figure 5.1 (a) Photograph of a cut-away automotive swash-plate compressor, (b) schematic of a crowned self-aligned pin (known as shoe)-on-disk test configuration for unidirectional testing simulating a swash plate compressor. Unidirectional sliding tests were performed on PTFE- and PEEK-based polymeric coatings at controlled elevated environment temperatures up to 110°C (machine chamber setting in closed loop). Note that the interface temperature is likely higher than the chamber temperature setting. Figure 5.1(a) shows a photograph of a typical swash-plate compressor showing the rotating swash-plate making contact with several crowned pins that drive the pistons. Figure 5.1(b) shows the contact configuration for unidirectional testing, showing a crown shaped pin (which is an actual component used in swash plate compressors and referred to as shoe in this work) in contact with a rotating disk coated 80PDF Image | TRIBOLOGY OF POLYMERIC COATINGS FOR AGGRESSIVE BEARING APPLICATIONS
PDF Search Title:
TRIBOLOGY OF POLYMERIC COATINGS FOR AGGRESSIVE BEARING APPLICATIONSOriginal File Name Searched:
thesis-tribology.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
| CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP |