PDF Publication Title:
Text from PDF Page: 006
1. Selecting the Installation Site [1] Installation Conditions Select the installation site in consultation with the client. Select a site to install the outdoor unit that meets the following conditions: • This unit is for outdoor installation only. • The unit will not be subject to heat from other heat sources. • The noise from the unit will not be a problem. • The unit will not be exposed to strong winds. • Water from the unit can be drained properly. • The space requirements (specified on pages 7 through 9) are met. <1> Providing protection against winds Using the figures at right as a reference, provide adequate protection against winds. A unit installed alone is vulnerable to strong winds. Select the installation site carefully to minimize the effect of winds. When installing a unit in a place where the wind always blows from the same direction, install the unit so that the outlet faces away from the direction of the wind. <2> Cold Climate Installation Wind • Install the outdoor unit in a place where it is not exposed to direct wind, such as behind a building. Observe the following when installing the units in areas where snow or strong winds prevail. • Avoid direct exposure to rain, winds, and snow. • Icicles that may form under the foundation can fall and inflict personal injury or property damage. Select the installation site carefully to reduce these risks, especially when installing the unit on a roof. • If the units are installed in the direct line of rain, winds, or snow, install the optional snow hood (on both the discharge and suction ducts). Use a snow net or snow fence as necessary to protect the unit. • Install the unit on a base approximately twice as high as the expected snowfall. • If the unit is continuously operated for a long time with the outside air temperature below the freezing point, install a heater at the base of the unit to prevent the water from freezing at the unit bottom. • When using the unit in an outdoor temperature of -15oC or below, install a drain pan (with heater whose capacity is 320 W or more) at the bottom surface of the unit. 6 Wind Wind • Install the outdoor unit so that the outlet/ inlet faces away from the wind.PDF Image | QAHV-N560YA-HPB
PDF Search Title:
QAHV-N560YA-HPBOriginal File Name Searched:
IBIM_WT08219X05_QAHV_N560YA_HPB_ML.pdfDIY PDF Search: Google It | Yahoo | Bing
CO2 Organic Rankine Cycle Experimenter Platform The supercritical CO2 phase change system is both a heat pump and organic rankine cycle which can be used for those purposes and as a supercritical extractor for advanced subcritical and supercritical extraction technology. Uses include producing nanoparticles, precious metal CO2 extraction, lithium battery recycling, and other applications... More Info
Heat Pumps CO2 ORC Heat Pump System Platform More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)