PDF Publication Title:
Text from PDF Page: 044
(3) Setting the outlet hot water temperature 1 Selecting the outlet hot water temperature setting method Select one of the following three outlet hot water temperature setting methods. Setting procedures Step 0 Set the ON/OFF switch (SWS1) to OFF. Set SWS1 to OFF from the remote controller or with the local switch. Settings cannot be changed unless the ON/OFF setting is set to OFF. * Set the dip switches on the circuit board as follows before making the settings for the items described in this section. SW2 SW3 -10 5 6 7 8 9 10 OFF OFF OFF OFF OFF ON OFF Press the push switch SWP3 to select item code 2. Press the push switches SWP1 or SWP2 to change the value of the selected item. The value will keep blinking while it is being changed. Step 1 Set the dip switches SW2 and SW3. Step 2 Select the desired item with the push switch SWP3. Step 3 Press the push switches SWP1 (↑) or SWP2 (↓) to increase or decrease the value. Settings table Items that can be set Item Initial Unit code value Setting Setting change from an optional remote controller Increments Lower Upper limit limit Setting method selection 1073 0 - 1 0 2 Not possible 0: Outlet Hot Water Temp. input PCB or PAR-W31MAA or AE-200 1: Outlet Hot Water Temp. input IT terminal 2: Outlet Hot Water Temp. input 4-20 mA (Analog input) Step 4 Press the push switch SWP3 to save the change. Press SWP3 once within one minute of changing the setting with SWP1 or SWP2 to save the setting. Once the new setting is saved, the display will stop blinking and stay lit. The display will, then, return to the item code display mode. If SWP3 is not pressed within one minute, the change will not be saved and the display will return to the item code display mode. * Configure the settings for all units even when controlling multiple units. 44PDF Image | QAHV-N560YA-HPB
PDF Search Title:
QAHV-N560YA-HPBOriginal File Name Searched:
IBIM_WT08219X05_QAHV_N560YA_HPB_ML.pdfDIY PDF Search: Google It | Yahoo | Bing
CO2 Organic Rankine Cycle Experimenter Platform The supercritical CO2 phase change system is both a heat pump and organic rankine cycle which can be used for those purposes and as a supercritical extractor for advanced subcritical and supercritical extraction technology. Uses include producing nanoparticles, precious metal CO2 extraction, lithium battery recycling, and other applications... More Info
Heat Pumps CO2 ORC Heat Pump System Platform More Info
| CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP |