PDF Publication Title:
Text from PDF Page: 007
mains power is available. The only adjustments to the unit are to set the desired hot water supply temperature & set the current time on the operation panel under the top housing cover, especially if the block out time setting is desired. See Set point adjustment, current time setting, and block out Note: time section on page 19. The entire system is set up and fully functional when supplied. Once all the water and electric connections have been made, the system will operate automatically provided that Figure 5: Heat pump installation example and dimensions mains power is available. The only adjustments to the unit are to set the cduersrierendt thimotewoantethr esuoppelryateiomnpearnaetul ruen&desretthe thoep chuorurseintgticmoeveorn&theespoepceiralltyioinf tphaenbelloucnkdoeurttthime etospehttoinugsiinsgdceosvirerd,.especially if the block out time setting is desired. See Set point adjustment, current time setting, and block out time section on page 19. ( ) Figure 45: Heat pump installation example and dimensions Unit Weight 106lbs Attach the drain elbow to th unit. The drain elbow is included in the in Attach a drain hose with 5/8 inch (16mm the drained water to an appropriate drain ( ) 4.82" DRAIN CONNECTOR 22.83" 4.82" Unit Weight e dr en 1a0i86nlbosp 16.24" ing located on the bottom of the heat pump stal o p unit. ) of n eter to the drain elbow to guide lat in ion kit f er diam r the heat pum . Unit:inch Water Piping Installation – Heat Pump Unit & Tank Attach the drain elbow to the drain opening located on the bottom of the heat pump unit. The drain elbow is included in the installation kit for the heat pump unit. All piping that connects to the water supply must be installed by a licensed contractor. Attach a drain hose with 5/8 inch (16mm) of inner diameter to the drain elbow to guide The water supplied to the system must comply with the potable water quality standard. the drained water to an appropriate drain. Use of water that does not comply with this standard could result in a malfunction of the system. Water Piping Installation – Heat Pump Unit & Tank TDS Total Description PH (Total Hardness Aluminium Chlorides Copper Iron Manganese Zinc Dissolved (calcium Ion All piping that connects to the water supply must be installed by a licensed contractor. the system. Solids) concentration) Maximum 6.0 Up to Up to Up to Up to Up to Up Up to Up The water supplied to the system must comply with the potable water quality standard. Levels to Use of wate9r.0that does not12cogmraipnlsy with this standpaprmd couldppremsult i0n.3a malfunction opfpm 500 ppm 200ppm or 0.2 ppm 200 hardness ppm The water supply must have a pressure of 29 PSI (200 kPa) or higher. TDS Total Description PH (Total Hardness Aluminium Chlorides Copper Iron Manganese Zinc 1.0 to 0.05 ppm to 5 Dissolved (calcium Ion A drain trap must be installed on the drain pipe if water is to be drained to a drain pan. Maximum 6.0 Levels to Solids) Up to 500 ppm concentration) USapntdoen Heat PumUp–toInstallatiUopn Mtoanual Up to Up Up to 0.05 ppm Up to 5 ppm 9.0 200ppm or 12grains hardness 200 1.0 to ppm ppm 0.3 Pa0g.e27popfm40 The water supply must have a pressure of 29 PSI (200 kPa) or higher. ppm A drain trap must be installed on the drain pipe if water is to be drained to a drain pan. Sanden Heat Pump – Installation Manual SANCO2 Heat Pump – Installation Manual Page 7 of 40 Page 7 of 44 14.02" 12.88" 0.59" 1.41"PDF Image | SANCO2 Heat Pump Water Heater R744
PDF Search Title:
SANCO2 Heat Pump Water Heater R744Original File Name Searched:
Installation_Manual_SANCO2.pdfDIY PDF Search: Google It | Yahoo | Bing
CO2 Organic Rankine Cycle Experimenter Platform The supercritical CO2 phase change system is both a heat pump and organic rankine cycle which can be used for those purposes and as a supercritical extractor for advanced subcritical and supercritical extraction technology. Uses include producing nanoparticles, precious metal CO2 extraction, lithium battery recycling, and other applications... More Info
Heat Pumps CO2 ORC Heat Pump System Platform More Info
| CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP |