PDF Publication Title:
Text from PDF Page: 023
Block Out Time Setting EBnlotecr kintOo uCtoTmimisesiSoneinttginMgode First option is the Heat Setting Enter into Commissioning Mode Second option is Temperature Setting– First option is the Heat Setting- Press the UP Key to access Block Out Time then Press Enter to access Second option is Temperature Setting– Block out time setting mode Press the UP Key to access Block Out Time then Press Enter to access This mode is used to set the block out time that prevents the heat pump unit This mode is used to set the block out time that blocks the heat pump unit operation within operation within the chosen time period. Tthheisemttoindgetimseu.seBdlotcoksoeutthimeebsloacrekuosuetdtimf theethcautstpormeveernhtasstahetimheaotfpuusme ptaruifnf.it operation within the chosen time period. Block out times are used if the customer has a time of use tariff or wants to take Change the mode advantage of Solar PV production Block oPurtetsimseasndarheouldseddowifnthUepcuasntdomDoewr hnakseaystimtoegeotfhuesreintathrieffcolorcwkadnitsptloaytamkeode to go to advantathgebolof cSkoloaurtPtiVmpersoedtuticntgiomn ode. Once the mode is changed, ‘bo’ and ‘00XX’ (00 = ‘bo’ and ‘00XX’ (00 = Out Beginning time, XX = Out end time) are displayed. (Initial setting start time, XX = end time) are displayed. (Initial setting = 00 o’clock for both start = 00 o’clock for both start and end) ‘bo’ anadn‘d00eXndX)’ (00 = Out Beginning time, XX = Out end time) are displayed. (Initial setting = 00 o’clock for both start and end) Adjust set block out Beginning time Adjust set block out start time Press Up or Down key and ‘00’ (start time) in ‘00XX’ starts flashing and ‘XX’ (end Adjust set block out Beginning time time) illuminates. Now the block out Beginning time can be adjusted. Setting can Press Up or Down key and ‘00’ (start time) in ‘00XX’ starts flashing and ‘XX’ (end Press Up or Down key and ‘00’ (start time) in ‘00XX’ starts flashing and ‘XX’ (end be performed only in hour increments, not in minutes. Time is displayed in Military time) illuminates. Now the block out start time can be adjusted. Setting can be time) illuminates. Now the block out Beginning time can be adjusted. Setting can performed only in hour increments, not in minutes. time not AM/PM be performed only in hour increments, not in minutes. Time is displayed in Military time not AM/PM Set block out Beginning time Set block out start time Press the Enter key to set the desired time setting. After the start time is set, the Press the Enter key to set the desired time setting. After the start time is set, the Set block out Beginning time start time display stops flashing. The end time display NOW starts flashing. start time display stops flashing. The end time display starts flashing at the same Press the Enter key to set the desired time setting. After the start time is set, the time. THIS TIME WILL THE TIME WHEN THE HEAT PUMP IS FIRST PREVENTED start time display stops flashing. The end time display NOW starts flashing. FROM OPERATING EVEN IF THE TANK IS COLD Adjust bTloHcIkSoTuItMeEndWtIimLLe THE TIME WHEN THE HEAT PUMP IS FIRST PREVENTED FSRetOtoMthOePdEeRsAireTdINeGndEtVimEeNbIFy uTsHinEgTUApNaKndISDCoOwLnDkeys. Setting can be performed Adjust block out end time only in hour increments, not in minutes. Set to the desired end time by using Up and Down keys. Setting can be performed Adjust block out end time only in hour increments, not in minutes. Time is displayed in Military time not Set to the desired end time by using Up and Down keys. Setting can be performed AM/PM Set block out end time only in hour increments, not in minutes. Time is displayed in Military time not Press enter key to adjust the desired time setting. After the end time is set, then it AM/PM Set block out end time starts to display ‘bo’ and ‘00XX’ (00 = start time, XX = end time) by turns. Press enter key to set the desired time setting. After the end time is set, the start Set block out end time time and end time are displayed for two seconds, then it starts to display ‘bo’ and Go back to clock display mode Press enter key to set the desired time setting. After the end time is set, the start ‘00XX’ (00 = start time, XX = end time) sequentially. Hold down Enter key to go back to the clock display mode. It will automatically go time and end time are displayed for two seconds, then it starts to display ‘bo’ and back to the clock display mode when no panel operation is performed for more THIS TIME WILL THE TIME WHEN THE HEAT PUMP IS NOW ALLOWED TO ‘00XX’ (00 = start time, XX = end time) sequentially. than 60 seconds. Block out time setting mode cannot be set unless the end time OPERATE BASED ON TANK TEMPERATURE TsHeItStinTgIMisEcoWnIfLirmL eTdH.E TIME WHEN THE HEAT PUMP IS NOW ALLOWED TO OPERATE BASED ON TANK TEMPERATURE Go back to clock display mode Cancel block out setting Press Enter key to go back to the clock display mode. It will automatically go back Go back to clock display mode To cancel the block out setting, set both start and end times to the same time. to the clock display mode when no panel operation is performed for more than 60 Press Enter key to go back to the clock display mode. It will automatically go back seconds. Block out time setting mode cannot be set unless the end time setting is to the clock display mode when no panel operation is performed for more than 60 ※Example setting confirmed. end time setting is s to ‘00’. Setting to seco nds. Block out time setting mode cannot be set unless the irBmoedS. etting For Example “ 13 01 ” ock out setting ncel the block out setting, set both beginning and end time ock out setting AM PM AM than ‘00’ (01 ~ 23) will be interpreted as a setting error and ncel the block out setting, set both beginning and end time Make sure to set both times to ‘00’ when cancelling the bl ○○○ than ‘00’ (01 ~ 23) will be interpreted as a setting error and g. Make sure to set both times to ‘00’ when cancelling the bl g. 01 Unit will not Run 13 Sanden Heat Pump – Installation Manual conf Cancel bl To ca Cancel bl other To ca the end time will s to ‘00’. Setting to flash. other ock out time the end time will settin flash. ock out time settin Page 21 of 40 Sanden Heat Pump – Installation Manual SANCO2 Heat Pump – Installation Manual Page 21 of 40 Page 23 of 44 Sanden Heat Pump – Installation ManualPDF Image | SANCO2 Heat Pump Water Heater R744
PDF Search Title:
SANCO2 Heat Pump Water Heater R744Original File Name Searched:
Installation_Manual_SANCO2.pdfDIY PDF Search: Google It | Yahoo | Bing
CO2 Organic Rankine Cycle Experimenter Platform The supercritical CO2 phase change system is both a heat pump and organic rankine cycle which can be used for those purposes and as a supercritical extractor for advanced subcritical and supercritical extraction technology. Uses include producing nanoparticles, precious metal CO2 extraction, lithium battery recycling, and other applications... More Info
Heat Pumps CO2 ORC Heat Pump System Platform More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)