PDF Publication Title:
Text from PDF Page: 016
Installation Tips Condensate As the unit is taking heat from the outside air, the coil on the unit will be colder than the ambient temperature. This means that depending on the humidity level of the outside air, the unit will produce condensate as it removes water vapor from the air. The quantity of condensate will depend on the current humidity level It is very important that this condensate be drained away from the outdoor unit and the outdoor unit be raised a minimum of 4” from the ground. This is particularly important in areas exposed to freezing weather as the melted condensate from defrost could create a slip and fall hazard. Defrosting of the outdoor coil occurs to remove frost buildup on the coil, the unit will calculate when to defrost based on operating conditions. The unit is supplied with a 5/8” drain hose connector for a hose to drain away the condensate (this can be found in the base of the heat pump packaging). Tank Connections All tank connections are 3⁄4”, this is designed to allow flexibility in the tank installation due to site conditions. For the heat pump piping, 2 x 3⁄4” to 1⁄2” reducers are required. Multiple heat pump systems For systems with multiple heat pumps attached to a single tank, every heat pump requires its own individual thermistor. The thermistor should be securely fitted in the thermistor well and secured with silicon or thermal paste. If using several thermistors, push the first thermistor(s) as deep into the well as it will possibly go, then follow up by inserting additional thermistor(s). Only one thermistor can go through the terminal block on the tank, with the other thermistors wired directly to the other heat pump units’ thermistor wire. Existing Tanks Sanden tanks have been developed to maximize performance and efficiency. For correct unit operation, it is important that the heat pump receives cold water, therefore we do not permit existing water heaters or tanks to be used. 16PDF Image | Sanden SANCO2 Heat Pump Water Heater 2017
PDF Search Title:
Sanden SANCO2 Heat Pump Water Heater 2017Original File Name Searched:
Sanden_sanc02_technical-info_10-2017_4.pdfDIY PDF Search: Google It | Yahoo | Bing
CO2 Organic Rankine Cycle Experimenter Platform The supercritical CO2 phase change system is both a heat pump and organic rankine cycle which can be used for those purposes and as a supercritical extractor for advanced subcritical and supercritical extraction technology. Uses include producing nanoparticles, precious metal CO2 extraction, lithium battery recycling, and other applications... More Info
Heat Pumps CO2 ORC Heat Pump System Platform More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)