PDF Publication Title:
Text from PDF Page: 202
Chapter 6. Molybdate Based Ceramic Electrode Materials 181 Figure 6-3. SEM micrographs of a Mo wire that had been subjected to 3% H2O/H2, then 50% H2O/H2 which caused oxidation to MoO2, then 3% H2O/H2 again which reduced it back to metal. 6.2. Experimental A variety of molybdate-based materials were studied. The compositions were systematically varied with 12.5-100 at% Mo or W on the B site in related ―families‖: SrMoO3, amorphous LaMoO, Sr2CoMoO6, Sr2FeMoO6, Sr2MgMoO6, Sr2MgWO6, Sr2NiMoO6, Sr2NiWO6, SrTi0.5Mo0.5O3, SrTi0.5Ni0.25Mo0.25O3, and Sr2V0.5Mo0.5O3. The compositions, B-site valences, crystal structures, and tolerance factors are given in Table 6-2. Polycrystalline samples were synthesized by solid state reaction (e.g. for Sr2MgMoO6: 2 SrCO3 + MgO + MoO3 Sr2MgMoO6 + CO2). Oxide and carbonate powders were mixed in stoichiometric quantities with ethanol and roll milled with YSZ balls for 12-24 h. The purities of the precursor powders are given in Table 6-3. The slurry was dried, hand-ground in an agate mortar and pestle, and the powder was heat treated to form the desired phase. Some heat treatments were in air and others were in 9% H2/Ar, room-temperature humidified 9% H2/Ar (adding ~3% H2O), or humidified 9% H2/Ar through a bubbler that was refrigerated (adding about 1.3% H2O). All heat treatments used heating and cooling rates of 2 °C/min. The powders were pressed into bars and pellets to prepare for sintering dense bodies. They were uniaxially pressed for 30 s at 50-100 MPa and then isostatically pressed for 30 s at 250 MPa. The green bodies were sintered in air orPDF Image | Electrolysis of CO2 and H2O
PDF Search Title:
Electrolysis of CO2 and H2OOriginal File Name Searched:
co2-hso-fuels.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
| CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP |