PDF Publication Title:
Text from PDF Page: 009
TXV BULB PRESSURE TRANSDUCER ISOLATION VALVE OIL OIL PUMP COOLER MOTOR OIL PUMP OIL HEATER SIGHT GLASS ISOLATION VALVE FILTER SIGHT GLASS ISOLATION VALVE OIL SKIMMER LINE MOTOR COOLING LINE STARTING EQUIPMENT The 19XR requires a motor starter to operate the centrifugal hermetic compressor motor, the oil pump, and various auxilia- ry equipment. The starter is the main field wiring interface for the contractor. See Carrier Specification Z-415 for specific starter require- ments, Z-416 for free-standing VFD requirements and Z-417 for unit-mounted VFD requirements. All starters must meet these specifications in order to properly start and satisfy me- chanical safety requirements. Starters may be supplied as sepa- rate, free-standing units or may be mounted directly on the chiller (unit mounted) for low voltage units only. Three separate circuit breakers are inside the starter. Circuit breaker CB1 is the compressor motor circuit breaker. The dis- connect switch on the starter front cover is connected to this breaker. Circuit breaker CB1 supplies power to the compressor motor. The main circuit breaker (CB1) on the front of the starter disconnects the main motor current only. Power is still energized for the other circuits. Two more circuit breakers inside the starter must be turned off to disconnect power to the oil pump, PIC II controls, and oil heater. Circuit breaker CB2 supplies power to the control panel, oil heater, and portions of the starter controls. Circuit breaker CB3 supplies power to the oil pump. Both CB2 and CB3 are wired in parallel with CB1 so that power is supplied to them if the CB1 disconnect is open. All starters must include a Carrier control module called the Integrated Starter Module (ISM), excluding the Benshaw solid-state starters. This module controls and monitors all as- pects of the starter. See the Controls section on page 10 for ad- ditional ISM information. All starter replacement parts are sup- plied by the starter manufacturer excluding the ISM (contact Carrier’s Replacement Component Division [RCD]). Unit-Mounted Solid-State Starter (Optional) — The 19XR chiller may be equipped with a solid-state, reduced- voltage starter (Fig. 5 and 6). This starter’s primary function is to provide on-off control of the compressor motor. This type of starter reduces the peak starting torque, reduces the motor in- rush current, and decreases mechanical shock. This capability is summed up by the phrase “soft starting.” The solid-state starter is available as a 19XR option (factory supplied and in- stalled). The solid-state starters manufacturer name is located inside the starter access door. A solid-state, reduced-voltage starter operates by reducing the starting voltage. The starting torque of a motor at full volt- age is typically 125% to 175% of the running torque. When the voltage and the current are reduced at start-up, the starting torque is reduced as well. The object is to reduce the starting voltage to just the voltage necessary to develop the torque re- quired to get the motor moving. The voltage is reduced by sili- con controlled rectifiers (SCRs). The voltage and current are then ramped up in a desired period of time. Once full voltage is reached, a bypass contactor is energized to bypass the SCRs. When voltage is supplied to the solid-state circuitry (CB1 is closed), the heat sinks in the starter as well as the wires leading to the motor and the motor terminal are at line volt- age. Do not touch the heat sinks, power wiring, or motor terminals while voltage is present or serious injury will result. REAR MOTOR BEARING FWD MOTOR BEARING OIL SUPPLY TO FORWARD HIGH SPEED BEARING Fig. 4 — Lubrication System 9 LABYRINTH GAS LINE EDUCTOR FILTERPDF Image | 19XR,XRV Hermetic Centrifugal Liquid Chillers 50/60 Hz With PIC II Controls and HFC-134a
PDF Search Title:
19XR,XRV Hermetic Centrifugal Liquid Chillers 50/60 Hz With PIC II Controls and HFC-134aOriginal File Name Searched:
19xr_4ss_Startup_PICII.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
| CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP |