PDF Publication Title:
Text from PDF Page: 008
2.2.2 Cross-section of tapered ceramic combustor liner 2.2.3 EBC coating 2.2.4 EBC in the ID surface of 6 in. Hexaloy cylinder 2.2.5 Multi-point premixer for Low emissions cylindrical combustor 2.2.6 PLIF imaging for the axial swirler nozzle 2.2.7 Representative nozzle boundary conditions 2.2.8 Predicted CO levels 2.2.9 Scroll impedance measurement setup 2.2.10 Impedance at various flow rates 2.2.11 Thermo-acoustic instability model predictions 2.3.1 19XR225 compressor 2.3.2 09DK094 Carrier air cooled condenser 2.3.3 Gen 1 ORC evaporator 2.3.4 Gen 1 ORC test system 2.3.5 Gen 1 ORC evaporator performance 2.3.6 Mach number profiles for turbine nozzles and gap 2.3.7 Turbine impellor and generator shaft with roller element bearings 2.3.8 Long term lubricant stability test results 2.3.9 Motor and oil cooling circuits and management systems 2.3.10 Motor and oil cooling circuit performance 2.3.11 Validation of condenser capacity and pressure drop 2.3.12 Over speed protection 2.3.13 Generation 2 ORC 2.3.14 Safe turbine operating zone 2.3.15 Modified-cascade closed-loop controller 3.1.1 Installation and integration of C200/ORC AMS 3.1.2 Instrumentation for integrated C200/ORC AMS 3.1.3 Microturbine measurements for exhaust and lost energy 3.2.1 C200 electrical efficiency 3.2.2 Measured C200 exhaust characteristics 3.3.1 Predicted ORC design point performance 3.3.2 Measured ORC system performance with C200 exhaust 3.3.3 ORC performance characteristics 3.3.4 ORC condenser performance 3.3.5 ORC recuperator pressure drop 3.3.6 ORC evaporator performance 4.2.1 Study of the feasibility of thermal spraying an integral vane ring. 4.2.2 Calculation of residual stress in Si layer on monolithic Si3N4. 4.2.3 Various architectures considered to drive down residual stress in the Si-layer of the coating. 4.2.4 EBC coating microstructure and digitized image for OOF analysis 4.2.5 (a) Retained strength of silicon nitride using an oxide interlayer between silicon nitride and Si bond coat. (b) Microstructure of the bond coat system that retains baseline substrate strength 1.2.7 Strength of samples fractured in four point bending shown as Weibull distribution 7PDF Image | ADVANCED MICROTURBINE SYSTEMS Final Report for Tasks 1 Through 4 and Task 6
PDF Search Title:
ADVANCED MICROTURBINE SYSTEMS Final Report for Tasks 1 Through 4 and Task 6Original File Name Searched:
AdvancedMicroturbineSystems_924484.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
| CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP |