ADVANCED MICROTURBINE SYSTEMS Final Report for Tasks 1 Through 4 and Task 6

PDF Publication Title:

ADVANCED MICROTURBINE SYSTEMS Final Report for Tasks 1 Through 4 and Task 6 ( advanced-microturbine-systems-final-report-tasks-1-through-4 )

Previous Page View | Next Page View | Return to Search List

Text from PDF Page: 035

the axial direction and allowed to spin at 54,900 rpm. Figure 2.1.15 is a plot of maximum principal stress with the disk spinning at a uniform 70°F. The maximum stress occurs in the bore and is predicted to be 55,000 psi. Figure 2.1.15 Cold spin distribution of rotor maximum principal stress Figure 2.1.16 contains plots of the rim stress in the radial and hoop directions. Plots of radial stress were used to center the blade pull under the blade as much as possible. The blade was initially stacked so the center of gravity of each blade section lied on a radial line. The radial line was then leaned 0.020” in the positive axial direction. An examination of the hoop stress plot showed large areas of tensile stress in the leading edge fillet. Many attempts were made to reduce this stress but no design change that could significantly reduce the stress was found. The maximum radial blade pull was 30,000 psi while the maximum hoop stress was 40,000 psi. Radial Stress Stress Hoop Stress Stress Figure 2.1.16 Cold spin rim hoop and radial stress Figure 2.1.17 contains plots of the temperature and maximum principal stress distribution in the hot spinning rotor. Convective heat transfer coefficients and sink temperatures 34

PDF Image | ADVANCED MICROTURBINE SYSTEMS Final Report for Tasks 1 Through 4 and Task 6

PDF Search Title:

ADVANCED MICROTURBINE SYSTEMS Final Report for Tasks 1 Through 4 and Task 6

Original File Name Searched:

AdvancedMicroturbineSystems_924484.pdf

DIY PDF Search: Google It | Yahoo | Bing

NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info

IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info

Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info

Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info

Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info

NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info

Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info

CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)