Energy Systems for Multigeneration Purposes

PDF Publication Title:

Energy Systems for Multigeneration Purposes ( energy-systems-multigeneration-purposes )

Previous Page View | Next Page View | Return to Search List

Text from PDF Page: 160

Figure 6.44: Effects of varying pinch point temperature on exergy efficiency for several cycles. Also, an increase in pinch point temperature leads to a slight decrease in exergy efficiency. Fig. 6.45 illustrates the effect of pinch point temperature on heating and cooling loads of the system. Both heating and cooling loads of the multigeneration system are observed to decrease with an increase in pinch point temperature. When the pinch point temperature increases, the flue gas temperature leaving the ORC evaporator increases, which results in a decrease in the ORC mass flow rate based on an energy balance for a control volume around ORC evaporator. Therefore, the lower the ORC mass flow rate, the lower are the heating and cooling loads. An increase in pinch point temperature increases the hot water mass flow rate leaving the domestic water heater. Since an increase in pinch point temperature leads to a rise in the temperature at point 33 of the system shown in Fig. 4.2, the flue gases enter the domestic water heater with a higher temperature, which results in an increase in hot water production. However, the pinch temperature has a negative effect on hydrogen production rate since an increase in pinch point temperature reduces the turbine power output. These results are shown in Fig. 6.46 160

PDF Image | Energy Systems for Multigeneration Purposes

PDF Search Title:

Energy Systems for Multigeneration Purposes

Original File Name Searched:

Ahmadi_Pouria.pdf

DIY PDF Search: Google It | Yahoo | Bing

NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info

IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info

Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info

Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info

Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info

NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info

Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info

CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)