PDF Publication Title:
Text from PDF Page: 142
Active Converter Electronics (ACE) Design: • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • ACE Specs Processor: TI TMS320F2810 (code compatible with ‘240) CPU 15MHz to 150Mhz (programmable) Throughput: 150 MIPs peak (executing from on chip RAM) Bus: no external bus Watch Dog Timer, Interrupt Controller, 3 Timers Memory on chip: Flash PROM 32K by 16 bits wide SRAM 18K by 16 OTP ROM 1K by 16 BOOT ROM 4K by 16 On card: Debug: Reset: Power: 32K by 8 Serial EPROM - optional JTAG (connector on motherboard) Status and power LEDs Power on, processor and external control +5V +/-10% @ 1A max Card will generate other voltages as needed 3.3V power and 2.500V reference will be sent to motherboard Temperature: -40C to +70C -- No air flow required Humidity: 5-95% non-condensing Communications: 1, 1Mbps CAN port – controller on ACE 1, 1Mbps RS485 port – controller on ACE 1, 4Mbps SPI port with 6 select lines Digital I/O: 38, control and status lines, 3.3V logic, 2mA drive Motor control (8 PWMs and 2 PWMShutdowns), interrupts Analog I/O: 16, 0-2.5 volts, 12 bit (10bit total acc), 3.3uS filtered, analog inputs 8, 0-2.5 volts, 8 bit, no filter, analog outputs - optional Connectors: 2, 60 pin “footprint only” gold surface connectors to motherboard Board tech: Surface mount only, single sided, 1oz copper (maybe 0.5oz), 6 layer, 6 mils clearance and 6 mils wide traces (min – power will be more), 2.0 inches by 3.0 inches; 0.062 inches thick; 0.5 inches max comp height 141PDF Image | Final Technical Report Advanced MicroTurbine System (AMTS) -C200 MicroTurbine -Ultra-Low Emissions MicroTurbine
PDF Search Title:
Final Technical Report Advanced MicroTurbine System (AMTS) -C200 MicroTurbine -Ultra-Low Emissions MicroTurbineOriginal File Name Searched:
975026.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)