PDF Publication Title:
Text from PDF Page: 094
temperature yielded both a higher cooling COP and higher exergetic efficiency. Also, they noted that increasing the heat source temperature could improve the cooling COP; however, a threshold value existed at which the COP of the system levelled off and then decreased. In the area of absorption system for heating, they found that increasing the heat source temperature would increase both the heating COP and the exergetic efficiency. However, this might be detrimental to the system operation since it might give rise to crystallization. They also found that increasing the temperature for the supply hot water would reduce the operating range of the system. Tozer and James (1997) developed the concept of a universal law of cold generation systems for heat-powered refrigeration cycles by merging the direct and reverse Carnot cycle with Carnot theory, through the combination of driving and cooling cycles, which produced cooling from a combustion process. They analysed the application of direct-fired ACs and their integration into CHP systems. From their analysis, they concluded that direct fired AC was economically feasible. MoneĢ et al. (2000) carried out an economic feasibility study of CHP by combining ACs with commercially available gas turbines. They found that these systems were of potential benefit to consumers. They also observed that the amount of heating or cooling available from the rejected heat and available to the AC system depended on the mass flow rate of the exhaust gas, the temperature of the gas and the turbine size. The cooling capacity was also found to be more affected by the exhaust flow rate than the temperature. 72PDF Image | Northumbria Research Link
PDF Search Title:
Northumbria Research LinkOriginal File Name Searched:
aneke.mathew_phd.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
| CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP |