PDF Publication Title:
Text from PDF Page: 105
based on a 22-year average of data measurements. To calculate the fluid exit temperature equation 4.5 was used to find the useful heat gain from the collector it was then modified to form equation 4.6 and used to calculate the outlet temperature. (4.5) (4.6) The heat removal factor, Fr, was found to be about 0.9. The amount of solar insolation, S, in the equation above was found from the 22-year average values from NASA. Aa and Ar are the aperture and receiver areas respectively. The inlet temperature was first assumed to be about 1000F but was then changed to about 4000F after talking to an associate at SEGS II. This was done because the fluid is warm when it enters the PTC because it comes from the storage tanks that contain some heat. The specific heat, Cp, was found from Therminol VP-1 thermodynamic properties. The mass flow rate was calculated from a volumetric flow rate of 100 GPM based on SEGS II’s flow rate. The useful energy gain was approximately 2000 kW. This leads to an outlet temperature of close to 700 0F. These results were thought to be inaccurately high when first calculated. After speaking with a SEGS II employee it was determined that they were accurate. The SEGS employee said that the flow rate was 100 GPM and had an outlet temperature at most of 7000F. Since the temperature was found to be much higher than expected the analysis was stopped here and it was determined that a STORC using PTC’s was a poor choice. 96PDF Image | NESTER, RYAN TIMOTHY. Organic Rankine Cycles: A Comparative Study and Analysis of Multiple Applications.
PDF Search Title:
NESTER, RYAN TIMOTHY. Organic Rankine Cycles: A Comparative Study and Analysis of Multiple Applications.Original File Name Searched:
etd.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)