PDF Publication Title:
Text from PDF Page: 003
Green Build and Energy Policy #3.10 Administration & Planning Applies to: University offices, faculty, staff, students, visitors, and vendors 6. All other building types will achieve energy efficiency that is a minimum of 20% above ASHRAE 90.1 2004 standards. C. Theabovestandardswillapplytobuildingconstructionprojectstoimprove,renovateorotherwise alter an existing building or structure which has been deemed to have inferior systems; and for which the life cycle analysis identifies that building systems perform negatively. For all other applicable building improvements, renovation, or alteration projects, such projects will exceed ASHRAE 90.1 2004 by 15%. D. Inadditiontotheaboverequirements,eachqualifiedbuildingconstructionprojectwithabudgetof $4 million or more will be certified to United States Green Building Council (USGBC) Leadership in Energy and Environmental Design (LEED) certified “Silver” or higher. Below are the required university mandated LEED points for each project: 1. Optimize energy performance, 2. Enhanced commissioning, 3. Enhanced refrigerant management, 4. Construction waste management/Low-emitting materials – paints and coatings, 5. Low-emitting materials - flooring systems, 6. Indoor chemical and pollutant source control, and 7. Thermal comfort: design. E. Requests to waive any of the university mandated points may be submitted to the university engineer along with compelling documentation as to why mandated points should not be pursued. Such waiver requests will be considered by the university engineer, in collaboration with the university architect and university landscape architect, according to the Building Design Standards Variance/Waiver Adjudication Process 1. Requests for waiver of the requirements of this policy for a specific project will follow the same procedure as outlined above. Escalation to the Office of Administration and Planning may occur as an outcome of the adjudication hearing process outlined above. 2. All policy waiver requests are expected to be presented for consideration prior to the beginning of the schematic design phase of the project. Failure to present the waiver request in a timely fashion may cause project delays and could become grounds for denial of the waiver request. F. Monitoring the impact of this policy is critical to informing its contribution to achieving sustainability for the university and for complying with related state law(s). The university will strive to develop regular reports on the impact of this policy, including those stipulated in ORC Sec. 3345.69, and make them available to the public through internet postings, present their findings at relevant university forums, and use their findings to inform other university led sustainability initiatives. Contributing to this, a project impact assessment may be conducted for all applicable building projects with a construction budget over $100,000. This report will describe the fiscal effects of energy efficiency and conservation measures pursued within the project. G. The mix of renewable and non-renewable energy sources employed and the increase in the efficiency of generating and delivering energy to university buildings will be considered on the basis of their relative value in reducing greenhouse gas emissions, lifecycle cost effectiveness, ability to incorporate the findings of university driven research, and ability to advance the university toward its greenhouse gas emission and other energy goals. Such improvements will be implemented as part The Ohio State University – Administration and Planning – Green Build and Energy Policy #3.10 Page 3 of 9PDF Image | Green Build and Energy Policy
PDF Search Title:
Green Build and Energy PolicyOriginal File Name Searched:
GreenBuildandEnergy.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)