PDF Publication Title:
Text from PDF Page: 008
((200KWH) X (3413BTU/KWH))/0.07 = 9,751,428 BTU/hour. The water requirement for this amount of BTU’s assuming a 60 degree reduction in resource temperature would be 9,751,428/500(60Degrees) = 325 GPM. The 500 value is a conversion factor. ( Rafferty 2000) Therefore, generation of the 175 to 200 net kW at the Lakeview site would require approximately 300 gpm of 206°F water for the boiler portion of the cycle and between 600 to 800 gpm of 59°F water for the cooling of the plant. With the rather warm temperature of the cooling water available a larger flow is required to cool the generator. Further discussion of cooling needs follow in this report. This amount is within the Town’s resource capacity at this time, and plants are commercially available at the 200 kW capacities, so 175 to 200 kW will be the amount used as a basis in this study. Contacts made with UTC Power of South Windsor, Connecticut, the manufacturer of Pure Cycle geothermal power plants, indicated that using their equipment with 300 gpm of 206°F water would produce 175KW of power with a cooling water requirement of 800 gpm at 59°F. Contacts made with ORMatt of Sparks, Nevada showed very nearly the same figures. Currently, the Town’s North Water Well is not used for domestic water supply due to arsenic concentrations. The arsenic levels for drinking water standards were lowered by the Environmental Protection Agency in 2006. Therefore, this well is well suited for the cooling task of power generation. Since cooling water is a large requirement for the project, alternate cooling methods or combined cooling methods may be applicable, and are further discussed in the next section. Cooling Options As in any low temperature power generation development, the cooling side of the cycle plays a key role in the design. Several options are available at the site. The Town’s North Water Well with a permitted capacity of 400 gpm of 59°F water is available as one potential cooling source. There is some indication that the well capacity may be increased to a higher flow, if necessary. Cooling towers open or closed, are also a possible cooling source. Lakeview’s relatively dry climate results in low wet bulb temperatures (temperature at which pure water will evaporate to saturate a given volume of air) on a year round basis making the tower option attractive. This report explores the cost and performance issues associated with three options for cooling: 100% well water, 100% closed tower and 100% open tower cooling. Lakeview Geothermal Power Generation Facility Feasibility Study 5PDF Image | LAKEVIEW GEOTHERMAL POWER GENERATION FACILITY FEASIBILITY
PDF Search Title:
LAKEVIEW GEOTHERMAL POWER GENERATION FACILITY FEASIBILITYOriginal File Name Searched:
LakeviewGeothermal.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)