PDF Publication Title:
Text from PDF Page: 016
The Town’s North Well could provide the cooling water for this option. The well was constructed in 1998 and designed with screens. Initial pumping tests during well construction by Anderson Engineering and Surveying, Inc. showed up to 585 gpm with a continuous test done at 400 gpm. An analysis of the original pumping tests show the well has a transmissitivity capacity of 1980 square feet per day with a well efficiency of 91%. This is excellent efficiency so pumping rates of 700 gpm should be available at increased well drawdown. Additional analysis of these tests by Dale Bugenig, hydro-geologist, of Eco:Logic in Reno, Nevada using a continuous pumping rate of 700 gpm resulted in a drawdown of 192’ below land surface allowing 22’ for seasonal interference from other wells. This analysis assumed no recharge or re-injection back into the aquifer of the used water. This is within the well capacity as the screens and water bearing strata used are at 222’ below land surface. If 230 gpm is diverted after cooling the generator to the proposed biomass plant, this leaves an amount of 470 gpm of water for reuse. Some agreements may be possible with irrigators in the vicinity to use the water and reduce the demand on their existing wells. However, this would take piping and would only be viable in the summer months. Re- injection of the remaining water is the only viable alternative as the water will recharge the aquifer in the well vicinity and result in only a 230 gpm net use of groundwater for the project. Re-injection is possible on the Town’s property near the area of Rabbit Hills Road and Geyser View Lane. Re-injection will greatly reduce the drawdown in the well at the 700 gpm pumping requirement to approximately 92 feet below land surface with the net water demand on the aquifer of 230 gpm. Re-injection will allow the aquifer to reach a steady state. This will also reduce pumping costs and require a minimum of return piping from the generator site to the re-injection well site. A re-injection well will require additional up-front capital cost. Using the existing re- injection well and mixing the cold and hot water is not advisable. Maintenance on a properly designed re-injection well will be minor cost factor over the life of the project. A comparative analysis of costs is covered in the Appendix under Profit (Loss) Calculations. Power Sales The project has the source wells, cooling water piping to the generator site, a cooling water source, and adequate property for the related improvements. All that remains is to sell the generated power. Two power providers are available to the Town; Surprise Valley Electric, located in Alturas, California (a rural cooperative), and PacifiCorp of Portland, Oregon. PacifiCorp’s service area is located east of the Rabbit Hills Road while Surprise Valley Electric’s service is west of the area. Lakeview Geothermal Power Generation Facility Feasibility Study 13PDF Image | LAKEVIEW GEOTHERMAL POWER GENERATION FACILITY FEASIBILITY
PDF Search Title:
LAKEVIEW GEOTHERMAL POWER GENERATION FACILITY FEASIBILITYOriginal File Name Searched:
LakeviewGeothermal.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)