PDF Publication Title:
Text from PDF Page: 054
6. Experimental Procedures Three main variables of the WHR ORC system are of interest: turbine speed, working fluid flow rate and ambient air temperature at the condenser. All other conditions were to be held constant during experiments, but it was found to not be easily accomplished. During testing of what was supposed to be steady state runs, the working fluid flow rate and water/glycol inlet temperature were fluctuating. However, much was learned about operation of the system and a general conclusion about system performance is made. 6.11 Test Procedures 6.11.1 Preparations All valves were actuated to the “System Run” configuration as shown in the valve configuration table in Appendix VII. Reference the P&ID in Appendix VI for valve locations in the system. The valve positions direct the entire mass flow rate of water/glycol from the heat source through the ORC vaporizer during testing. Power was applied to all components including the pump and generator VFD, condenser and DAQ system. The condenser temperature controller was set to 23.9 °C. This setting causes two condenser fans to come on at a condensate exit temperature of 18.3 °C and another 42PDF Image | ORC WASTE HEAT RECOVERY SYSTEM WITH A TESLA-HYBRID
PDF Search Title:
ORC WASTE HEAT RECOVERY SYSTEM WITH A TESLA-HYBRIDOriginal File Name Searched:
waste-heat-expander-tesla.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)