PDF Publication Title:
Text from PDF Page: 146
As was shown in Chapter 4, optimization of the heat exchanger lengths is important for achieving high cycle efficiency. Figure 6.14 shows the optimum heat exchanger lengths for the recompression Brayton cycle. The optimum length of the pre-cooler is 1.05 m and is virtually independent of the total heat exchanger volume. The optimum lengths of both recuperators increase as the total heat exchanger volume increases. The length of the low temperature recuperator is bigger than the length of the high temperature recuperator, which corresponds to the higher fractional pressure drop. The lower effectiveness and higher length of the low temperature recuperator indicates that there is a lower temperature difference in the low temperature recuperator. 0.5 0.4 0.3 0.2 0.1 0 Pre-cooler HT Recuperator LT Recuperator 80 110 140 3 170 200 Total Heat Exchanger Volume (m ) Figure 6.15 Optimum heat exchanger volume fractions for recompression cycle The optimum heat exchanger volume fractions show the importance of the precooler for the lower values of total heat exchanger volume. Figure 6.15 shows that while the optimum volume fraction of the pre-cooler is decreasing with total heat exchanger volume the optimum volume fractions of the high and low temperature recuperators increase. The fraction of heat exchanger volume that is not used by the pre-cooler is split between the high and low temperature recuperators. Slightly more of the volume is 127 Optimum HX FractionPDF Image | Supercritical Carbon Dioxide Cycle for Next Generation Nuclear Reactors
PDF Search Title:
Supercritical Carbon Dioxide Cycle for Next Generation Nuclear ReactorsOriginal File Name Searched:
Infinity_dostal.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)