PDF Publication Title:
Text from PDF Page: 119
5 Although, in general, car manufacturers do not condone this option on safety grounds, there have been many hundreds of thousands of retrofits for ten or more years without any incidents. However, if such a retrofit is to be carried out, it must be acknowledged and accepted by the vehicle owner. The possibility of cross contamination of refrigerants and improper system evacuation is generally noticed in MVAC servicing in many developing countries which leads to poor performance of the system. In some cases, such bad practices are attributed as a result of improper retrofitting processes. Retrofitting of R22 supermarket refrigeration system The following steps should be followed when retrofitting a supermarket refrigeration system from R502 or R22 to an HFC refrigerant that is not a drop-in blend: 1 - Pump-down the R502 or R22 refrigerant charge to the liquid receiver. 2 - Drain as much of the old lubricant from the system as possible, including from the compressor sump, oil reservoir, and oil separator. If large amounts of mineral oil remain, it may clog the system and cause the efficiency of the heat exchangers to decline. 3 - Replace oil filters and filter driers when performing oil changes. 4 - Measure the amount of oil removed, add back an identical quantity of new oil. Ensure that the new oil chosen is approved by the compressor manufacturer. 5 - Run the system with the existing refrigerant for at least 24 hours. Systems running for an extended period may require fewer oil changes. 6 - Check the system for leaks. 7 - Repeat steps 1 through 4 until the residual oil is less than 5%, testing using lab analysis or a refractometer. 8 - Evaluate expansion devices using the process described. 9 - Recover the R502 or R22 from the system. 10 - Evacuate the system. 11 - Evaluate the pressure controls, including high pressure cut-outs, fan cycling controls, and pressure relief devices. 12 - Recharge the system with the new HFC refrigerant. 13 - Check the system for leaks. Valve rebuilds (for systems built before 1995) Systems built before 1995 will most likely require new gaskets and O-rings (elastomers): 1 - Rebuild all Evaporator Pressure Regulators (EPRs). 2 - Rebuild all solenoid valves. 3 - Rebuild hold back valves. 4 - Rebuild heat reclaim valves. 119 RetrofittingPDF Image | Manual for Refrigeration Servicing Technicians
PDF Search Title:
Manual for Refrigeration Servicing TechniciansOriginal File Name Searched:
Refrigeration_Servicing.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)