PURECYCLE POWER SYSTEM MODEL 280 Application Guide

PDF Publication Title:

PURECYCLE POWER SYSTEM MODEL 280 Application Guide ( purecycle-power-system-model-280-application-guide )

Previous Page View | Next Page View | Return to Search List

Text from PDF Page: 014

PERFORMANCE DATA Gross electrical power output Net electrical power output1 Voltage and frequency standard System sound level Frequency range Power factor Maximum line voltage deviation (vs. rated line voltage) Line voltage unbalance Harmonics Interruption/disconnection Table 3 – Performance Data Performance Characteristics 280 kW 265 kW1,2 480 V, 3 phase, 3 wire 60 Hz 272 kW 257kW1,2 400/415V, 3 phase, 3 wire, 50 Hz 78 dBa at 10 m (33 ft) 263 kW 248 kW1,2 380V, 3 phase, 3 wire, 50 Hz 49.0 – 51.0 Hz Electrical Characteristics 59.3 – 60.5 Hz 49.0 – 51.0 Hz Greater than 0.95 lagging 1.10 to 0.88 ±3% Voltage Total Harmonic Distortion (THD) < 5% Current THD < 5% (IEEE 519 compliant) The system interrupts if it detects an abnormal grid condition. It can be configured to automatically re-start in < 20 minutes. Grid protection includes over/under voltage/frequency. Protection parameters 1 Net power is the gross generator power minus internal parasitic power within the PureCycle system. It does not account for additional parasitic power required by the site to provide resource and cooling water flow. 2 Net power output is resource-liquid and cooling-water dependent. Contact your Pratt & Whitney Power Systems representative for more information and an analysis of your specific resource. PRESSURE AND TEMPERATURE RATING Heat exchangers in the PureCycle power system have the following pressure and temperature ratings. Heat exchangers are U1 stamped per the ASME Boiler and Pressure Vessel Code Section VIII. Table 4 – Pressure and Temperature Rating 150 psig (1034 kPa) 150 psig (1034 kPa) 345 psig (2380 kPa) Tube (water) side 1 Condenser temperature limit is set by system operating limit of exit cooling water temperature below 120oF (49oC). Site design must provide safety relief for the evaporator on the customer water side. Proper venting of the power plant pressure relief valves for the working fluid is also required to prevent overpressure of the system. Refer to ASHRAE 15 Safety Standards for Refrigeration Systems for proper installation of equipment. PERFORMANCE DATA Assembly Pressure Rating Temperature Rating Condenser Shell side Tube (water) side Evaporator Shell side 225oF (107oC) 120oF (49oC)1 330oF (177oC) 150 psig (1034 kPa) 325oF (163oC) Revision B – 09/23/2009 – Page 14 HTE66510

PDF Image | PURECYCLE POWER SYSTEM MODEL 280 Application Guide

PDF Search Title:

PURECYCLE POWER SYSTEM MODEL 280 Application Guide

Original File Name Searched:

Purecycle_application_guide.pdf

DIY PDF Search: Google It | Yahoo | Bing

NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info

IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info

Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info

Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info

Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info

NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info

Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info

CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)