COMPREHENSIVE RENEWABLE ENERGY FEASIBILITY STUDY Sitka

PDF Publication Title:

COMPREHENSIVE RENEWABLE ENERGY FEASIBILITY STUDY Sitka ( comprehensive-renewable-energy-feasibility-study-sitka )

Previous Page View | Next Page View | Return to Search List

Text from PDF Page: 057

Tidal Energy TIDAL All coastal areas consistently experience two high and two low tides over a period of slightly greater than 24 hours. But for those tidal differences to be harnessed into electricity, the difference between high and low tides must be at least five meters, or more than 16 feet. There are only about 40 sites on the planet with tidal ranges of this magnitude. Tidal Systems Where tidal power generation is possible, the most prevalent technology is one similar to that used in traditional hydroelectric plants. The first requirement is a dam, or barrage, across a bay or estuary. Gates and turbines are installed along the dam. Since building dams is an expensive proposition, the best tidal sites are those where a bay has a narrow opening. When the tides produce an adequate difference in the level of the water on opposite sides of the dam, the gates are opened, water flows through the turbines, and the turbines turn an electric generator to produce electricity. (Fact Sheet, 2009) Tidal Dam Where tidal power generation is possible, the most prevalent technology is one similar to that used in traditional hydroelectric plants. The first requirement is a dam, or barrage, across a bay or estuary. Gates and turbines are installed along the dam. Since building dams is an expensive proposition, the best tidal sites are those where a bay has a narrow opening. When the tides produce an adequate difference in the level of the water on opposite sides of the dam, the gates are opened, water flows through the turbines, and the turbines turn an electric generator to produce electricity. (Fact Sheet, 2009) Tidal Fence Another technology to harness tidal energy is the tidal fence. Tidal fences look like giant turnstiles. They can reach across channels between small islands or across straits between the mainland and an island. The turnstiles spin via tidal currents typical of coastal waters. Some of these currents run at 5 to 8 knots (5.6 to 9 miles per hour) and generate as much energy as winds of much higher velocity. Because seawater has a much higher density than air, ocean currents carry significantly more energy than air currents (wind). (Fact Sheet, 2009) There are no large‐scale commercial tidal fences currently in operation anywhere in the world. However, there are plans to construct a fence across the Dalupiri Passage between the islands of Dalpiri and Samar in the near future Tidal Turbine A third technology is the tidal turbine. Tidal turbines look like wind turbines. They are arrayed underwater in rows, as in some wind farms. The turbines function best where coastal currents run at between 3.6 and 4.9 knots (4 and 5.5 mph). In currents of that speed, a 15‐meter (49.2‐feet) diameter tidal turbine can generate as much energy as a 60‐meter (197‐feet) diameter wind turbine. Ideal locations for tidal turbine farms are close to shore in water depths of 20 to 30 meters (65.5 to 98.5 feet). Currently, there are no operational tidal turbine farms. But European Union officials had identified 106 sites in Europe as suitable locations for such farms. The Philippines, Indonesia, China, and Japan also have underwater turbine farm sites that could be developed in the future. (Fact Sheet, 2009) Tidal flats located near Totem Park in Sitka. (Picture by Travis Clemens)

PDF Image | COMPREHENSIVE RENEWABLE ENERGY FEASIBILITY STUDY Sitka

PDF Search Title:

COMPREHENSIVE RENEWABLE ENERGY FEASIBILITY STUDY Sitka

Original File Name Searched:

Traviss_Study.pdf

DIY PDF Search: Google It | Yahoo | Bing

NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info

IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info

Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info

Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info

Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info

NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info

Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info

CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)