PDF Publication Title:
Text from PDF Page: 005
through the reservoir and into the pump where the pressure is raised. The exiting high pressure fluid goes through the power recuperator and enters the boiler to complete the cycle. The power side working fluid, HFC-245fa, was selected as the power side working fluid as it has the desired thermodynamic properties for higher cycle efficiency. In addition, it has zero ozone depletion potential, relatively low global warming potential, and it is nontoxic, nonflammable, and noncorrosive. The cooling side is a standard vapor compression cycle. Instead of using an electrical motor to drive the compressor, the compressor was directly coupled to the expander. The conversion losses associated with electrical motors are eliminated. The high pressure vapor after compression goes through the standard condensing and evaporating processes before completing the loop. The working fluid HFC-134a was used as the refrigerant. It is found widely in various mobile air-conditioning applications. Figure 1: P&ID Diagram of the Combined Power and Cooling Cycle 2. Combined Cycle Thermodynamic Analysis From the thermodynamic stand point, the higher the heat input temperature and the lower the heat rejection temperature, the higher the thermodynamic performance of the system. In reality, however, there are always constraints that design engineers have to address with trade-offs having to be made. For a waste heat stream at any given temperature, it is desirable to recover as much waste energy as possible. This leads to lower temperature waste stream exhaust, 5PDF Image | Performance of a Combined Organic Rankine Cycle
PDF Search Title:
Performance of a Combined Organic Rankine CycleOriginal File Name Searched:
WangHailei.MechEngrng.PerformanceCombinedORC.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)