US Department of Energy Tribal Energy Program

PDF Publication Title:

US Department of Energy Tribal Energy Program ( us-department-energy-tribal-energy-program )

Previous Page View | Next Page View | Return to Search List

Text from PDF Page: 060

GRANITE MOUNTAIN SITE VISIT REPORT SEPTEMBER 19‐21, 2009 By Dick Benoit & Gwen Holdmann October 19th, 2009 LOCATION Granite Mountain Hot Springs are located on the southern flank of Granite Mountain, a large rounded hill at the far eastern edge of the Seward Peninsula in Western Alaska. The center of the hot pool at Granite Mountain is at N 65o 22’ 08.63” and W 161o 15’ 25.56”. The area immediately around the thermal springs for hundreds of feet is largely covered by willows, which in turn are surrounded by tundra. The thermal spring can be accessed by snowmobile or ATV. There is an airstrip located about 2.2 miles NNE of the hot springs. There are 2 adjoining cabins located a few yards from the large thermal pool which was obviously dug by man for bathing purposes. The area is heavily impacted by refuse. An additional area discharging warm water was discovered during this work about 1000’ NE of the hot pool. BEDROCK GEOLOGY The rocks in the vicinity of the thermal springs consist of either high grade metamorphic rocks intruded by abundant granitic material or are migmatites. No attempt was made to try to map or define units within this complex as bedrock outcrops in less than 1% of the area. TOPOGRAPHIC SETTING The main hot spring area is on a gently planar slope dipping to the southeast. The main thermal springs are located at the lower edge of the planar slope about 40 to 50 vertical feet above the creek. A modest sized creek, which can locally be crossed on foot, drains off of Granite Mountain and flows toward the SW and SSW below the hot springs. This creek has a sharp change in direction from NE‐SW to NNE‐SSW adjacent to the thermal spring. Between the thermal springs and the creek there is a much steeper escarpment which can be as high as 30 to 40 feet. This escarpment rapidly diminished downstream of the thermal springs and gradually diminishes upstream over a distance of 1⁄2 mile. The total length of this escarpment is about 0.6 miles and it appears to be perhaps the most important geologic feature controlling the location of the geothermal system. Over 95% of the area is covered by tundra and willows. The only actual outcroppings of bedrock are two small areas located about 350’ east of the hot pool at the base of the escarpment on the north side of the cold stream. These are overlain by alluvium exposed on the face of the escarpment. A small percentage of the area consists of flat outcroppings of frost shattered rock generally broken into blocks less than a foot in diameter. In places these appear to be pattern ground (polygonal shapped). THERMAL FEATURES DESCRIPTION The Granite Mountain Hot Springs rather unremarkable. The main thermal area near the cabin(s) has been heavily modified by man with a pool about 75’ x 60’ being excavated with a dam on its lower side. The pool has a maximum depth of about 4’ with a soft bottom, generally covered by algae. There are 4 orifices tens of feet above the pool that produce water with a maximum temperature of 119 oF. These orifices are heavily coated with algae. In only one spot is a small area of cemented gravel visible. These springs do not precipitate any significant or noteworthy amount of travertine or sinter. The pool has 3 areas near its upper edge where bubbles signify additional inflow of thermal fluid. There is plenty of noncondensible gas available for sampling but there is no noticeable smell of hydrogen sulphide. No gas

PDF Image | US Department of Energy Tribal Energy Program

PDF Search Title:

US Department of Energy Tribal Energy Program

Original File Name Searched:

NANAGAPfinal18Aug10.pdf

DIY PDF Search: Google It | Yahoo | Bing

NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info

IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info

Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info

Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info

Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info

NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info

Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info

CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)