PDF Publication Title:
Text from PDF Page: 069
3.0 Field Work 3 Field work was completed by Peter Illig (ACEP), Steve Buckley (WHPacific) and Matt Bergan (WHPacific) from April 15th to the 17th. The group drove snowmachines from Kobuk to Division hot springs on the 15th and completed the mapping, temperature measurements and sample collection on the 16th. The 17th was spent traveling back to Kobuk and Kotzebue. Three water samples were collected with the sample from the hottest spring (160°F) being analyzed by the Desert Research Institute in Reno Nevada for silica and the basic anions and cations. The results of the field work are detailed below. Division Hot Springs is located northeast of the Seward Peninsula and north of the Yukon- Koyukuk basin at the headwaters of the Division Selawik (Figure 1). It can be reached by a snowmachine trail from Huslia, Shungnak or Kobuk. The hot springs are located in the center of the Shungnak quadrangle. 3.1.1 Location There are two main springs located at approximately 66° 22’ 40” N 156° 44’ 40” W. The springs lie in a valley that runs downhill to the NE. The surrounding vegetation is comprised of tundra and small spruce trees, while the spring area has little vegetation aside from moss and some smaller plants. The overburden of the vegetated areas is >1m in most areas while the area of the springs it is only a few centimeters thick. The stream running down the valley, cuts through the upper springs and flows around both sides of the lower springs. Figure 1 Digital Elevation Map of AlaskaPDF Image | US Department of Energy Tribal Energy Program
PDF Search Title:
US Department of Energy Tribal Energy ProgramOriginal File Name Searched:
NANAGAPfinal18Aug10.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)