PDF Publication Title:
Text from PDF Page: 036
Figure 15 Transport Membrane Condenser (Source: Liu, 2006) 3.3.2.5 Heat Pumps (Upgrading LowTemperature Waste Heat) Heat exchange technologies described above involve flow of energy “downhill” from a high temperature to a lowertemperature enduse. This can place limitations on opportunities for heat recovery when the waste heat temperature is below the temperature needed for a given heating load. (For example, waste heat may be available in the form of hot water at 90oF [32oC], while hot water at 180oF [82oC] is needed elsewhere in the facility). In such cases, a heat pump may provide opportunities for “upgrading” heat to the desired enduse temperature. Heat pumps use external energy inputs to drive a cycle that absorbs energy from a lowtemperature source and rejects it at a higher temperature. Depending on the design, heat pumps can serve two functions: either upgrading waste heat to a higher temperature, or using waste heat as an energy input for driving an absorption cooling system. Heat pumps are most applicable to low temperature product streams found in process industries including chemicals, petroleum refining, pulp and paper, and food processing. Upgrading heat can be economical in some cases depending on the temperature differential required and the relative costs of fuel and electricity. If a facility has a heat load at a slightly higher temperature than the waste heat source, the heat can sometimes be provided more efficiently by a heat pump than if it were obtained from burning additional fossil fuels. Figure 16 displays typical energy losses associated with a heat pump and a steam boiler. In this example, the boiler requires 1.25 million Btu fuel input to provide 1 million Btu of heat. Meanwhile, the heat pump requires an input of only 0.72 Million Btu for electricity generation in conjunction with the 0.78 Million Btu already available from the waste heat stream. The analysis below assumes a coefficient of performance (COP) of 4.5 and a boiler efficiency of 80%. The COP is a measure of heat pump performance, determined from the heat output and work input: COP = Q W Equation (5) 21 PDF Image | Waste Heat to Energy Tech Opportunities in US Industry
PDF Search Title:
Waste Heat to Energy Tech Opportunities in US IndustryOriginal File Name Searched:
waste_heat_recovery.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)