PDF Publication Title:
Text from PDF Page: 013
Starting with the blade loading coefficient, as shown in figure 6 the maximum efficiency of the loading coefficient ranges between (0.8 - 0.1). In the designed program starting with a value of 0.8 an iterative process is followed until reaching a value where the incidence loss would is minimised. Another important parameter is the exit flow coefficient which is related to the loading coefficient as shown in figure 6. It is clear that the best efficiency range is (0.2- 0.3), a value of 0.25 was chosen as it corresponds to the highest efficiency. The ratio of axial length to rotor inlet radius( )was chosen to be 0.7 as recommended by Whitefield and Baines 1990 as this geometric value depends on past experience and there are no correlations to determine it. The value of exit hub to inlet tip radius ratio( )was chosen to be 0.3 according to Baines 2003 and Jacob et al 2012. The rotor meridional velocity ratio normally has a value near 1.0 as suggested by Baines 2003. Figure 6: Correlation of attainable radial turbine efficiency Baines (2003). A stator loss coefficient of 0.08 was assumed, which is feasible for the turbine stator. The turbine total to static efficiency assumed to be 90%; this means that this design is aiming for higher efficiency than the target. For designing the nozzle guide vanes design, the vane chord to rotor inlet diameter ( ) was selected to be 0.3 as suggested by Heitt and Johnston 1964. The values of Vane chord to vane pitch (solidity) ( ), Thickness of vane leading edge to vane chord ( ) and thickness of vane trailing edge to vane height ( ) where given values of 1.2, 0.285 and 0.12 respectively following the recommendations of Aungier 2006. The interspace geometry value ( ) recommended by Watanabe et al (1971) for minimum losses was suggested to be two. 8PDF Image | Optimised Radial Turbine Design D1.8
PDF Search Title:
Optimised Radial Turbine Design D1.8Original File Name Searched:
Optimised-Radial-Turbine-Design.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP |