PDF Publication Title:
Text from PDF Page: 061
temperature range was 22.8-20.5 °C. All 4 fans of the condenser were running during data collection with the condenser fan controller set at 23.9 °C. 7.3.1 Testing Day 2 Results 1. During testing the pump was not producing the pressure and correlated flow rate required to move the turbine inlet point on a P-h diagram to the vapor saturation line. The vapor was exiting the vaporizer superheated. The pump speed command was increased with no associated increase in flow rate or pressure. Eventually, the motor overheated and shut off. 2. The water/glycol inlet temperature to the vaporizer was not stable during testing. 3. The post processed data showed the unrealistic result that enthalpy was increasing from the inlet to exit of the turbine while the turbine was generating power. 4. It was shown the exit pressure at the condenser was within 0.007 MPa of the inlet to the pump. 5. A system relative efficiency to turbine RPM plot was obtained. Issue (1) above was assumed to be caused by the pump motor slipping excessively. All alternating current induction motors experience some amount of slip. As load is increased slip and motor heating increase, in this case, to the point of motor shutdown. Studying the pump VFD manual revealed the VFD possessed an automatic slip compensation system, but was not activated during testing. To solve the slip problem, slip compensation was enabled on the pump VFD. The solution to issue (2) above was to more closely watch the vaporizer inlet temperature. If the temperature begins to deviate the WHR ORC system operator 49PDF Image | ORC WASTE HEAT RECOVERY SYSTEM WITH A TESLA-HYBRID TURBINE
PDF Search Title:
ORC WASTE HEAT RECOVERY SYSTEM WITH A TESLA-HYBRID TURBINEOriginal File Name Searched:
Cirincione_colostate_0053N_10857.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
| CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP |