PDF Publication Title:
Text from PDF Page: 157
CHAPTER 4: Manufacturing and Experimental Testing of the Developed Compressed Air RIT 4.3.2. Instrumentation The test facility was instrumented with measuring devices of temperature, static and total pressures, flow rate and torque to enable evaluating the turbine power and efficiency under a range of operating conditions. 4.3.2.1. Thermocouples Three thermocouples were installed at the turbine inlet pipe while four equi-spaced thermocouples were located circumferentially around the turbine exit pipe close to the rotor blade. All thermocouples utilized in measurements were T-type Omega TJC100- CPSS-M075G-150 probes with the sheath diameter of 0.75mm, length of 150mm and the accuracy of ±0.5°C according to the manufacturer. 4.3.2.2. Pitot-static tube and pressure transducers The turbine was instrumented with a Pitot-static tube at the turbine inlet pipe to measure the total and static pressures simultaneously. Each of the Pitot tube ports were connected directly to two 10bar GE UNIK 5000 pressure transducers. A 6bar Druck PTX 1400 pressure transducer were fitted at the turbine exit duct for measuring the exit static pressure. All pressure transducers were 4-20 mA current output with accuracy of ±0.04% full scale according to the manufacturer. 100 ohms resistances were connected to the data logger external terminal board to convert the current signal to voltage signal (up to 2 volt). The pressure transducers were excited with 0.005A and a voltage of 24V from ISO-TECH IPS4303 laboratory DC power supply. The electrical wiring of the pressure transducers with the data logger and power supply is illustrated in Figure 4-7 below. 134 | P a g ePDF Image | SMALL-SCALE RADIAL INFLOW TURBINE FOR WHR ORC
PDF Search Title:
SMALL-SCALE RADIAL INFLOW TURBINE FOR WHR ORCOriginal File Name Searched:
small-scale-radial-inflow-turbine-whr-orc.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)