PDF Publication Title:
Text from PDF Page: 295
CHAPTER 7: Conclusions and Recommendations for Future Work 13.19% compared to 11.94% obtained from the mean-line optimization with relative improvement of 10.46% and underlined the effectiveness of the 3-D CFD optimization approach performed in this thesis to further improve the ORC performance. Such results were considerably higher than the reported values for other types of expanders in the literature and highlighted the potential and effectiveness of the combined mean-line and CFD optimizations approaches proposed and developed in the thesis. With the validated CFD model such tool can be used for further analysing and optimizing small-scale RITs to enhance the ORC performance. 7.3. Recommendations for future work The present study is a step toward developing efficient RITs for small-scale ORC systems. However, more research is required in the following aspects: The developed mean-line model was capable of only designing and optimizing the RITs at their design point (new geometries are created based on each set of input parameters). However, it is suggested to extend the model so that it can also be used for the analysis of RITs where the geometry is obtained and fixed from the design code and then imported to the analysis code to assess its performance under off-design operating conditions. Such feature is particularly important as it allows the multi-point mean-line optimization of RITs for the ORC systems that are subjected to the heat source fluctuations (i.e. solar or geothermal heat) and is helpful for optimizing the cycle performance over a range of operating conditions and not only at a single design point. It is suggested to conduct the same optimizations as in chapter five but instead of the simple ORC layout, both the recuperated ORC and supercritical ORC systems be 272 | P a g ePDF Image | SMALL-SCALE RADIAL INFLOW TURBINE FOR WHR ORC
PDF Search Title:
SMALL-SCALE RADIAL INFLOW TURBINE FOR WHR ORCOriginal File Name Searched:
small-scale-radial-inflow-turbine-whr-orc.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
| CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP |