PDF Publication Title:
Text from PDF Page: 184
172 IPCC Special Report on Carbon dioxide Capture and Storage Astarita, G., D.W. Savage, and A. Bisio, 1983: Gas Treating with Chemical Solvents, Chapter 9 Removal of Carbon Dioxide. Wiley, New York. Audus, H. and P. Freund, 2005: Climate change mitigation by biomass gasification combined with CO2 capture and storage. Proceedings of 7th International Conference on Greenhouse Gas Control Technologies. E.S. Rubin, D.W. Keith, and C.F. Gilboy (eds.), Vol. 1: Peer-Reviewed Papers and Overviews, E.S. Rubin, D.W. Keith and C.F. Gilboy (eds.), Elsevier Science, Oxford, UK, 187-200. Babcock Energy Ltd, Air Products Ltd, University of Naples and University of Ulster, 1995: Pulverised coal combustion system for CO2 capture. Final report 2.1.1, European Commission JOULE II Clean Coal Technology Programme - Powdered Coal Combustion Project. Babovic, M., A. Gough, P. Leveson, and C. Ramshaw, 2001: Catalytic Plate Reactors for Endo- and Exothermic Reactions. 4th International Conference on Process Intensification for the Chemical Industry, Brugge, Belgium, 10-12 September. Bachu, S., and W. Gunter, 2005: Overview of Acid Gas Injection in Western Canada. In E.S.Rubin, D.W. Keith, and C.F. Gilboy (eds.), Proceedings of 7th International Conference on Greenhouse Gas Control Technologies. Volume I: Peer Reviewed Papers and Overviews, Elsevier Science, Oxford, UK, 443-448. Bai, H., A.C. Yeh, 1997: Removal of CO2 Greenhouse Gas by Ammonia Scrubbing. Ind. Eng. Chem. Res, 36 (6), 2490-2493. Bandi, A., M. Specht, P. Sichler, and N. Nicoloso, 2002: In situ Gas Conditioning in Fuel Reforming for Hydrogen Generation. 5th International Symposium on Gas Cleaning at High Temperature. U.S. DOE National Energy Technology Laboratory, Morgantown, USA. Barchas, R., R. Davis, 1992: The Kerr-McGee / ABB Lummus Crest Technology for the Recovery of CO2 from Stack Gases. Energy Conversion and Management, 33(5-8), 333-340. Beecy, D.J. and Kuuskraa, V.A., 2005: Basic Strategies for Linking CO2 enhanced oil recovery and storage of CO2 emissions. In E.S.Rubin, D.W. Keith and C.F. Gilboy (eds.), Proceedings of the 7th International Conference on Greenhouse Gas Control Technologies (GHGT-7), September 5-9, 2004, Vancouver, Canada. Volume I: Peer Reviewed Papers and Overviews, Elsevier Science, Oxford, UK, 351-360. Blomen, L.J.N.J. and M.N. Mugerwa, 1993: Fuel Cell systems, Plenum Press, New York, 1993, ISBN 0-36-44158-6. Bock, B., R. Rhudy, H. Herzog, M. Klett, J. Davison, D. De la Torre Ugarte, and D.Simbeck, 2003: Economic Evaluation of CO2 Storage and Sink Options, DOE Research Report DE-FC26- 00NT40937, U.S. Department of Energy, Pittsburgh Energy Technology Center, Pittsburgh, PA. Bouwmeester, H.J.M., L.M.Van Der Haar, 2002: Oxygen permeation through mixed-conducting perovskite oxide membranes. Ceramic Transactions, 127, Materials for Electrochemical Energy Conversion and Storage, 49-57. BP, 2004: Statistical Review of World Energy. Http:\www.bp.com. Bracht, M, Alderliesten P.T., R. Kloster, R. Pruschek, G. Haupt, E. Xue, J.R.H. Ross, M.K. Koukou, and N. Papayannakos, 1997: Water gas shift membrane reactor for CO2 control in IGCC systems: techno-economic feasibility study, Energy Conversion and Management, 38 (Suppl.), S159-S164, 1997. Brandvoll, Ø. and O. Bolland, 2004: Inherent CO2 capture using chemical looping combustion in a natural gas fired power cycle. ASME Paper No. GT-2002-30129, ASME Journal of Engineering for Gas Turbines and Power, 126, 316-321. Bredesen, R., K. Jordal and O. Bolland, 2004: High-Temperature Membranes in Power Generation with CO2 capture. Journal of Chemical Engineering and Processing, 43, 1129-1158. Breton, D.L. and P. Amick, 2002: Comparative IGCC Cost and Performance for Domestic Coals, Preceedings of the 2002 Gasification Technology Conference, San Francisco, October. Campanari, S., 2002: Carbon dioxide separation from high temperature fuel cell power plants. Journal of Power Sources, 112 (2002), 273-289. Carolan, M.F., P.N. Dyer, E. Minford, T.F. Barton, D.R. Peterson, A.F. Sammells, D.L. Butt, R.A. Cutler, and D.M. Taylor, 2001: Development of the High Pressure ITM Syngas Process, Proceedings of the 6th Natural Gas Conversion Symposium, Alaska, 17-22 June. Castle, W.F., 1991: Modern liquid pump oxygen plants: Equipment and performance, Cryogenic Processes and Machinery, AIChE Series No: 294; 89:14-17, 8th Intersociety Cryogenic Symposium, Houston, Texas, USA. CCP, 2005: Economic and Cost Analysis for CO2 Capture Costs in the CO2 Capture Project, Scenarios. In D.C. Thomas (Ed.), Volume 1 - Capture and Separation of Carbon Dioxide from Combustion Sources, Elsevier Science, Oxford, UK. Celik, F., E.D. Larson, and R.H. Williams, 2005: Transportation Fuel from Coal with Low CO2 Emissions, Wilson, M., T. Morris, J. Gale and K. Thambimuthu (eds.), Proceedings of 7th International Conference on Greenhouse Gas Control Technologies. Volume II: Papers, Posters and Panel Discussion, Elsevier Science, Oxford UK, 1053-1058. Chakma, A., P. Tontiwachwuthikul, 1999: Designer Solvents for Energy Efficient CO2 Separation from Flue Gas Streams. Greenhouse Gas Control Technologies. Riemer, P., B. Eliasson, A. Wokaun (eds.), Elsevier Science, Ltd., United Kingdom, 35-42. Chakma, A., 1995: An Energy Efficient Mixed Solvent for the Separation of CO2. Energy Conversion and Management, 36(6- 9), 427-430. Chakravarty, S., A. Gupta, B. Hunek, 2001: Advanced technology for the capture of carbon dioxide from flue gases, Presented at First National Conference on Carbon Sequestration, Washington, DC. Chapel, D.G., C.L. Mariz, and J. Ernest, 1999: Recovery of CO2 from flue gases: commercial trends, paper No. 340 at the Annual Meeting of the Canadian Society of Chemical Engineering, Saskatoon, Canada, October. Chatel-Pelage, F., M. Ovidiu, R. Carty, G. Philo, H. Farzan, S. Vecci, 2003: A pilot scale demonstration of oxy-fuel combustion with flue gas recirculation in a pulverised coal-fired boiler, Proceedings 28th International Technical Conference on Coal Utilization & Fuel Systems, Clearwater, Florida, March 10-13. Cheeley, R., 2000: Combining gasifiers with the MIDREX® direct reduction process, Gasification 4 Conference, Amsterdam, Netherlands, 11-13 April. Chen, C., A.B. Rao, and E.S. Rubin, 2003: Comparative assessment ofPDF Image | CARBON DIOXIDE CAPTURE AND STORAGE
PDF Search Title:
CARBON DIOXIDE CAPTURE AND STORAGEOriginal File Name Searched:
srccs_wholereport.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)