PDF Publication Title:
Text from PDF Page: 007
Sensors 2020, 20, 6087 7 of 13 in the coil pattern. Future application of biocompatible Parylene-C coating may resolve sensitivity to scraping as the microcoils will be fully encapsulated. Additionally, insulation layer application (SU-8 bridge) is challenging to perform manually as the center edge of the coil cannot be contacted by the insulation material; the interface pad must be connected to the center edge to fully utilize the geometry of the spiral coil and maximize radiated field patterns. Figure 6. (a) A successfully printed AJP coil with a 12 μm thickness and 112.8 μm trace width connected to a two-probe system for characterization. (b) Resulting undesirable coils when printed if leaks or clogs persist during the printing process, preventable by utilizing the table in the Aerosol Jet manual. (c) An AJP coil with an SU-8 insulation bridge before the interface-pad printing stage. (d) Close up of a printed coil with insulation bridge and interface pads. The SU-8 bridge contains an air bubble, which is not desirable; however, does not impact functionality after baking and solidification. Additionally, though the interface pad trace makes contact with a portion of the coil before the end located at the center, the coil will be driven at a frequency that will resonate with the larger rings, and the magnetic fields will be negligibly affected. (e) The full device: coil, SU-8 insulation bridge, and interface pads. Figure 7. Wyko NT2000 (Veeco) profilometer partial output of a coil with an SU-8 bridge. Characterization involves the application of current to the coil, then a voltage measurement across the two ends of the coil. The measurements involve a two-probe system connected to the Micromanipulator (Carson City, NV , USA) platform. Direct contact of the probes with the silver microcoil can easily damage the coil continuity which results in reduced coil length. The coils demonstrate a resistivity range of 2.33 × 10−7 to 4.54 × 10−7 Ω · m. In addition to resistivity measurements, basic inductance calculations [19] were performed to calculate the inductance of the microcoils. The coils demonstrated an inductance between 11.9 and 17.7 nH, which is a generally lower inductance and indicate that the generated fields will appear and disappear quickly as input current is applied and removed. Identical coils may be produced per printed batch if the assembly phase demonstrates no clogs or leaks in the printing system, the exact nanoparticle ink is used, and identical sheath gas rate parameters are inputted into the KEWA control program. Identical coils exhibit thePDF Image | Silver-Nanoparticle Microcoil via Aerosol Jet Printing
PDF Search Title:
Silver-Nanoparticle Microcoil via Aerosol Jet PrintingOriginal File Name Searched:
sensors-20-06087-v2.pdfDIY PDF Search: Google It | Yahoo | Bing
Turbine and System Plans CAD CAM: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. More Info
Waste Heat Power Technology: Organic Rankine Cycle uses waste heat to make electricity, shaft horsepower and cooling. More Info
All Turbine and System Products: Infinity Turbine ORD systems, turbine generator sets, build plans and more to use your waste heat from 30C to 100C. More Info
CO2 Phase Change Demonstrator: CO2 goes supercritical at 30 C. This is a experimental platform which you can use to demonstrate phase change with low heat. Includes integration area for small CO2 turbine, static generator, and more. This can also be used for a GTL Gas to Liquids experimental platform. More Info
Introducing the Infinity Turbine Products Infinity Turbine develops and builds systems for making power from waste heat. It also is working on innovative strategies for storing, making, and deploying energy. More Info
Need Strategy? Use our Consulting and analyst services Infinity Turbine LLC is pleased to announce its consulting and analyst services. We have worked in the renewable energy industry as a researcher, developing sales and markets, along with may inventions and innovations. More Info
Made in USA with Global Energy Millennial Web Engine These pages were made with the Global Energy Web PDF Engine using Filemaker (Claris) software.
Infinity Turbine Developing Spinning Disc Reactor SDR or Spinning Disc Reactors reduce processing time for liquid production of Silver Nanoparticles.
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)