PDF Publication Title:
Text from PDF Page: 175
similar way to its unfilled counterpart. An alternative hypothesis is that the boundary between the carbon fibre and the PEEK provides small channels through which the CO2 may travel preferentially, negating somewhat the more tortuous route through the polymer matrix. This hypothesis is supported by observation made from Figure 43 where it can be seen that the percentage mass loss is loosely linear for unfilled PEEK, whereas there is a step change after a lag time of 120 minutes for the carbon fibre filled grades. This step change is thought to be the result of two effusion rates of CO2 from the sample. The primary route is via the channels formed by the presence of carbon fibres, the second route being via the polymer matrix. The offset in percentage mass loss between filled and unfilled PEEK, shown in Figure 43, results from the carbon fibre’s inability to absorb CO2. Therefore, for a given sample mass it is apparent that the carbon fibre filled sample will absorb, and therefore release, a lower mass of CO2. Since the PEEK samples were processed exclusively with CO2 it is possible to infer that the mass loss observed by TGA is a result of the release of CO2. To test this inference, the exhaust gas from the TGA was coupled to the FT-IR using a gas cyclone accessory as detailed in Chapeter 3.4.3. The TGA thermogram for PEEK 450PF processed with scCO2 are shown in Figure 44. 174PDF Image | Supercritical Fluids and Their Application to the Recycling of High-Performance Carbon Fibre Reinforced Composite Materials
PDF Search Title:
Supercritical Fluids and Their Application to the Recycling of High-Performance Carbon Fibre Reinforced Composite MaterialsOriginal File Name Searched:
Dandy15PhD.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
| CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP |