PDF Publication Title:
Text from PDF Page: 121
(13) ver foils, isolated from each other; between bothmetals there is an electric potential that creates a reduced ionisation in the flowing liquid. In its further motion, water penetrates into the main mixer (F) which is an in- sulated-against-heat standing cylindrical device, that is silvered within and in of which is located an upward-spiralling path which direction of winding go- es against that of the snail and is made out of wire mesh. On the spiral's surface are orderly placed cooling spirals, that take the temp- erature of water from 17°C to 4°C. The goal of this temperature fall is to pro- perly combine the chemical elements; through the cooling will be increased the absorption of gases in water, on the other side it makes possible the combinat- ion and enrichment of free carbonic acid of the resulting masses without the u- sage of pressure. The Ca(HCO3)2 presents a weak exterior combination that the enrichnent with the forementioned carbonic acid in water had worked out, but it is only possible the enrichment of Ca(HCO3)2 with carbonic acid through cooling in water and the maintenance of an even temperature. The temperature of outflowing water must not be over 20°C and its final temper- ature (once it was processed) should not be over 4°C; also must be taken into consideration that the speed of flow must not be too fast so as to allow the proper mixing of liquids; after abandoning the container ( F ) , the liquid is ma- de to flow through gold and silver foils until reaching vessel (I), which is divided into chambers (G) and (H). First the water that overflows from (G) falls into chamber (H), and so on out of the device (z). By the treatment of water as indicated, many reactions are produced, first of all the water is made wholly drinkable; also it is necessary to eliminate any possible exposition to light during the process for the falling of light over the treated liquids produces a loss of quality in the final results. (7)Austrian Patent N°166644 "Plow" (Bodenbearbeitungsgerat), August 25, 1950 It resulted from numerous experiments that a better ploughing of the soil can be made, instead of using plows made of Iron or Steel, with Copper-covered plo- ws; this difference becomes stronger when one notices that speed of ploughing becomes faster and that the friction between the ground and the corresponding portion of the plow is greater. This effect because of overspeed produces the slow desintegration of the Copper cover and the minute Copper portions deposited in the soil produce a catalytic effect, that in turn generates a better water-retention in the ground and also a further increase in quality of ploughing. These findings were made when passing a plow which body was either covered or entirely made with Copper. But as the building in whole of the plow with Copper is disadvantadgeous, then it will be convenient to cover those portions made with hard metal with Copper layers in hardened condition, which can be made through several different meth- odologies; the deposit of Copper particles under the ground does not break the magnetic permeability of the soil, as does Iron or Steel. In the illustrations (see next page) are shown two embodiments for this invent- ion, Figures 1 and 2 show a lateral view and Figures 3 to 5 show a transversal cut, a longitudinal cut and one plowing protrusion (Eggenzahn), In Figures 1 and 2 is illustrated a plow which point (1) is made out of Steel as usual, but it can also be covered with the corresponding Copper-cover; this portion cuts through the ground generating friction in the process; another is in the smaller portion ( 2 ) , upon which upper portion there is usual a small he-PDF Image | IMPLOSION by Viktor Schauberger
PDF Search Title:
IMPLOSION by Viktor SchaubergerOriginal File Name Searched:
vitor-schauberger-implosion-the-path-of-natural-energy.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)