PDF Publication Title:
Text from PDF Page: 039
TA 6M: Waste Heat Recovery Excess air Flue gas Heat source Heat waste Higher heating value (hhv) Latent heat Lower heating value (lhv) Phase change Rankine cycle Recuperator Regenerator Regenerative heating Reverberatory furnace Sensible heat The air remaining after a fuel has been completely burned, or that air supplied in addition to the quantity required for complete stoichiometric combustion. A lean fuel/air ratio contains excess air. All gases—combustion gases, products of combustion (e.g. water vapor), excess oxygen, nitrogen, etc.—that leave a furnace, recuperator, or regenerator, by way of the flue. A medium or process from which heat may be extracted. For heat transfer to occur between a source and recipient, the source must always be at a temperature higher than the recipient. Energy in the form of heat rejected or lost from a process, which may be recovered or reused in another process providing it is of sufficient quality (i.e., hot enough and there is a use for it). The total heat obtained from combustion of a specified amount of fuel and its stoichiometrically correct amount of air, both being at 60°F when combustion starts, and after the combustion products are cooled, hence includes the latent heat of vaporization of water vapor produced by the combustion process. See lower heating value. Heat absorbed or given off by a substance without changing its temperature, as when melting, solidifying, evaporating, condensing, or changing crystalline structure. The gross heating value minus the latent heat of vaporization of the water vapor formed by the combustion of hydrogen in the fuel. The process of changing from one physical state (solid, liquid, or gas) to another, with a necessary or coincidental input or release of energy. An idealized thermodynamic cycle that converts sensible heat into mechanical work. The Rankine cycle that is an ideal standard for comparing performance of heat-engines, steam power plants, steam turbines, and heat pump systems that use a condensable vapor as the working fluid; efficiency is measured as work done divided by sensible heat supplied. Equipment that uses hot flue gases to preheat air for combustion. The flue gases and airflow are in adjacent passageways so that heat is transferred from the hot gases, through the separating wall, to the cold air. A cyclic heat interchanger, which alternately receives heat from gaseous combustion products and then transfers heat to air before combustion. The process of using heat that is rejected in one part of a cycle for another function or in another part of the cycle. A reverberatory furnace is a metallurgical or process furnace that isolates the material being processed from contact with the fuel, but not from contact with combustion gases. Heat exchanged by a body or system that results in a temperature change, (as opposed to latent heat). 38 QuadrennialTechnologyReview2015PDF Image | Innovating Clean Energy Technologies in Advanced Manufacturing
PDF Search Title:
Innovating Clean Energy Technologies in Advanced ManufacturingOriginal File Name Searched:
QTR2015-6M-Waste-Heat-Recovery.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)