PDF Publication Title:
Text from PDF Page: 020
experiments were made for relatively low Reynolds number partly for laminar flow. The discharges seemed to be more homogenous in case of AC voltage than for DC, more, they were more homogenous for positive DC than for negative. They observed a drag reduction up to 73% for a 10 kV AC voltage of 60 Hz frequency. A model has been then proposed [19] for low Reynolds number taking into account the forces due to the electric wind generated between one electrode to the other. The experiments were consistent with the model proposed. 5.2.4.Wire electrode parallel to a conducting cylinder Hyun and Chun [30] made experiments on a cylinder of diameter 6 cm placed in a wind tunnel with a maximum velocity of 2.5 m/s. A thin aluminum foil covered the cylinder surface and is used as the grounded electrode. Two thin stainless steel wires (diameter 0.09 mm) are both connected to the high voltage supply and placed over and under the horizontal diameter of the cylinder (figure 41). Four different positions are tested (figure 42). In position 1 the two wires are upstream the cylinder. In position 2 the two wires are on the vertical diameter line of the cylinder and in positions 3 and 4 downstream the cylinder. Experiments were made for different voltage applied to the wires placed in the different positions and visualization of the flow was recorded. In any wires position, the electric wind generated by the wires had an important effect on the flow pattern. 5.2.5. Razor blade electrode on a cylinder 19PDF Image | PLASMA FUNCTIONALIZATION OF MULTI-SCALE STRUCTURES
PDF Search Title:
PLASMA FUNCTIONALIZATION OF MULTI-SCALE STRUCTURESOriginal File Name Searched:
plasmaactuators.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)