PDF Publication Title:
Text from PDF Page: 004
17th World Textile Conference AUTEX 2017- Textiles - Shaping the Future IOP Publishing IOP Conf. Series: Materials Science and Engineerin1g23245546(72809107) 042021 doi:10.1088/1757-899X/254/4/042021 4. Results and discussion At a speed of 0.02m/s, the TEG completes a cycle where the components fully overlap then fully separate. As a result of a small area of friction, the surface of one component of the TEG gains positive charges whilst the other gains negative charges producing a potential difference. The maximum open circuit voltages (Voc) produced for the PA6 TEG samples 1, 2, 3 and 4 were 320V, 360V, 700V and 800V respectively, refer to figure 2. The maximum Voc for the PTFE TEG samples 1, 2, 3 and 4 were 800V, 700V, 700V and 1000V respectively, refer to figure 3. The EPD produced was non uniform therefore standard deviation was applied to the data set where the average was calculated to gain a more accurate depiction of the EPD. The PA6 TEG samples 1, 2, 3 and 4 produced an average Voc of approximately 170V, 180V, 650V and 730V. The PTFE TEG samples 1, 2, 3 and 4 produced an average Voc of approximately 410V, 650V, 660V and 880V. Figure 4 presents the mean Voc produced for the four samples of the PA6 and PTFE TEG. Figure 5 presents the mean Voc produced for the four samples correlating the output with the polymers of the TEG’s. Figure 2. PA6 TEG Maximum Voc (a) Sample 1: 30mmx30mm (b) Sample 2: 30mmx40mm (c) Sample 3: 30mmx50mm (d) Sample 4: 30mmx60mm. 3PDF Image | Triboelectric effect in energy harvesting
PDF Search Title:
Triboelectric effect in energy harvestingOriginal File Name Searched:
Triboelectric_effect_in_energy_harvesting.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
| CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP |