PDF Publication Title:
Text from PDF Page: 059
Combined cycle plants are generally open cycle systems, however CC closed systems are possible if not that common. The plant system may also incorporate other accessories, such as a gear box (often used to “convert” 60 Hz models to 50Hz models), and/ or subsystems (that may themselves be closed or open systems) such as: • condensing units, intercooling heat exchangers (for the GT compressor air), • a regeneration (heat addition) heat exchanger to preheat the GT compressor discharge air, • reheat heat exchangers (for adding heat to the GT turbine module products of combustion), • inlet cooling and/or water or steam injection on the GT for power augmentation and/or NOx reduction, • a closed or open steam (and/ or air) cooling system (for the hottest areas of the GT turbine module), and • a supplementary firing system positioned downstream of the GT exhaust to maximize combustion of the exhaust gases (which will include unburned fuel hydrocarbons). See the block diagram figures below for a representation of GT closed systems, one with regeneration and intercooling, and one with reheat and regeneration. They are followed by a figure that represents a GT open system with water injection and regeneration. 59 Fig. 71. A Schematic of a GT closed system with regeneration and intercooling. Source: Courtesy McGraw Hill, from “Power Generation Handbook”, Kiameh, P. Fig. 72. A Schematic of a GT closed system with regeneration and reheat. Source: Courtesy McGraw Hill, from “Power Generation Handbook”, Kiameh, P.PDF Image | GAS TURBINES IN SIMPLE CYCLE COMBINED CYCLE APPLICATIONS
PDF Search Title:
GAS TURBINES IN SIMPLE CYCLE COMBINED CYCLE APPLICATIONSOriginal File Name Searched:
gas-turbine-combined-cycle.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)