PDF Publication Title:
Text from PDF Page: 162
of graphic art and the fabrication of conductive interconnects and touch sensors, were conducted to validate the potential of practical application of the TENG-driven e-jet printing process. This works not only expands the application field of TENG, but also provides an alternative way of driving the high-resolution e-jet printing with unprecedented merits of safety, cost-effectiveness, and controllability. 5.2.4 Experimental Methods 5.2.4.1 TENG Fabrication The acrylic substrates (1/8 inch thick) of the stator and rotator were prepared using laser cutting. Two Al films were pasted onto the inner and outer sections of the stator to function as the electrodes, and then covered by a PTFE film (200 μm thick) as one triboelectric material. The prepared nylon films (50 μm thick) were partially inserted into and fixed on the slits of the rotator. All nylon films were bended in one direction so that they would not be twisted when sweeping across the stator clockwise. The rotator was fixed on the shaft of a rotating motor (Oriental Motor, BLFM230-A, 30 W & 0.6 kg) for motion control and the distance between the rotator and stator was adjusted so that the free part of a nylon film can cover about one electrode sector during rotation. The open-circuit voltage of the TENG was measured using a Keithley 6514 electrometer and a resistance-based voltage divider. 5.2.4.2 E-Jet Printing To perform the e-jet printing, the setup given in Figure 1a was prepared. The positive output of the boost circuit was attached to liquid dispensing nozzles (Brostown) 148PDF Image | HIGH PERFORMANCE TRIBOELECTRIC NANOGENERATOR AND ITS APPLICATIONS
PDF Search Title:
HIGH PERFORMANCE TRIBOELECTRIC NANOGENERATOR AND ITS APPLICATIONSOriginal File Name Searched:
WU-DISSERTATION-2019.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
| CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP |