PDF Publication Title:
Text from PDF Page: 005
AIP Advances ARTICLE scitation.org/journal/adv FIG. 5. (a) Net jet pressure (excluding the contribution from the injected air but with no microwave power) at various air flow settings as a function of the microwave power (in a unit of W). Linear fits were obtained with m representing the slope and c representing the y-axis intercept. I represents the air flow rate (in a unit of m3/h). (b) Similar to (a), but with the x-axis representing the air flow rate. AUTHORS’ CONTRIBUTIONS D.Y. and J.L. contributed equally to this work. This work was financially supported by the National Nature Science Foundation of China (National Key Scientific Facility, Grant No. 51727901). The microwave system was fabricated by Uniplasma, Shenzhen, China. DATA AVAILABILITY The data that support the findings of this study are available within the article. AIP Advances 10, 055002 (2020); doi: 10.1063/5.0005814 © Author(s) 2020 REFERENCES 1R. Bini, B. M. Colosimo, A. E. Kutlu, and M. Monno, “Experimental study of the features of the kerf generated by a 200A high tolerance plasma arc cutting system,” J. Mater. Process. Technol. 196, 345–355 (2008). 2M. A. Hussein, C. Suryanarayana, and N. Al-Aqeeli, “Fabrication of nano- grained Ti–Nb–Zr biomaterials using spark plasma sintering,” Mater. Des. 87, 693–700 (2015). 3A. Kromka, O. Babchenko, T. Izak, K. Hruska, and B. Rezek, “Linear antenna microwave plasma CVD deposition of diamond films over large areas,” Vacuum 86, 776–779 (2012). 4A. P. Bolshakov, V. G. Ralchenko, V. Y. Yurov, A. F. Popovich, I. A. Antonova, A. A. Khomich, E. E. Ashkinazi, S. G. Ryzhkov, A. V. Vlasov, and A. V. Khomich, “High-rate growth of single crystal diamond in microwave plasma in CH4 /H2 and CH4/H2/Ar gas mixtures in presence of intensive soot formation,” Diam. Relat. Mater. 62, 49–57 (2016). 5 M. Keidar, R. Walk, A. Shashurin, P. Srinivasan, A. Sandler, S. Dasgupta, R. Ravi, R. Guerrero-Preston, and B. Trink, “Cold plasma selectivity and the possibility of a paradigm shift in cancer therapy,” Br. J. Cancer 105, 1295–1301 (2011). 6G. Isbary, G. Morfill, H. U. Schmidt, M. Georgi, K. Ramrath, J. Heinlin, S. Karrer, M. Landthaler, T. Shimizu, B. Steffes, W. Bunk, R. Monetti, J. L. Zimmermann, R. Pompl, and W. Stolz, “A first prospective randomized controlled trial to decrease bacterial load using cold atmospheric argon plasma on chronic wounds in patients,” Br. J. Dermatol. 163, 78–82 (2010). 7T. Shimizu, B. Steffes, R. Pompl, F. Jamitzky, W. Bunk, K. Ramrath, M. Georgi, W. Stolz, H.-U. Schmidt, T. Urayama, S. Fujii, and G. E. Morfill, “Characteriza- tion of microwave plasma torch for decontamination,” Plasma Process Polym. 5, 577–582 (2008). 8 N. N. Misra, S. Patil, T. Moiseev, P. Bourke, J. P. Mosnier, K. M. Keener, and P. J. Cullen, “In-package atmospheric pressure cold plasma treatment of strawberries,” J. Food Eng. 125, 131–138 (2014). 9P. Basaran, N. Basaran-Akgul, and L. Oksuz, “Elimination of Aspergillus para- siticus from nut surface with low pressure cold plasma (LPCP) treatment,” Food Microbiol. 25, 626–632 (2008). 10S. Nomura, H. Toyota, M. Tawara, H. Yamashita, and K. Matsumoto, “Fuel gas production by microwave plasma in liquid,” Appl. Phys. Lett. 88, 231502 (2006). 11R. Miotk, B. Hrycak, D. Czylkowski, M. Dors, M. Jasinski, and J. Mizeraczyk, “Liquid fuel reforming using microwave plasma at atmospheric pressure,” Plasma Sources Sci. Technol. 25, 035022 (2016). 12M. Tichonovas, E. Krugly, V. Racys, R. Hippler, V. Kauneliene, I. Stasiulaitiene, and D. Martuzevicius, “Degradation of various textile dyes as wastewater pollu- tants under dielectric barrier discharge plasma treatment,” Chem. Eng. J. 229, 9–19 (2013). 13M. Hlina, M. Hrabovsky, T. Kavka, and M. Konrad, “Production of high qual- ity syngas from argon/water plasma gasification of biomass and waste,” Waste Manag. 34, 63–66 (2014). 14R. L. Burton and P. J. Turchi, “Pulsed plasma thruster,” J. Propuls. Power 14, 716–735 (1998). 15O. V. Batishchev, “Minihelicon plasma thruster,” IEEE Trans. Plasma Sci. 37, 1563–1571 (2009). 16J. R. Brophy, M. G. Marcucciet, G. B. Ganapathial, C. E. Garner, M. D. Henry, B. Nakazono, and D. Noon, “The ion propulsion system for Dawn,” in AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2003. 17N. Monrolin, F. Plouraboué, and O. Praud, “Electrohydrodynamic thrust for in-atmosphere propulsion,” AIAA J. 55, 4296–4305 (2017). 18C. K. Gilmore and S. R. H. Barrett, “Electrohydrodynamic thrust density using positive corona-induced ionic winds for in-atmosphere propulsion,” Proc. Math. Phys. Eng. Sci. 471, 20140912 (2015). 19H. Xu, Y. He, K. L. Strobel, C. K. Gilmore, S. P. Kelley, C. C. Hennick, T. Sebastian, M. R. Woolston, D. J. Perreault, and S. R. H. Barrett, “Flight of an aeroplane with solid-state propulsion,” Nature 563, 532–535 (2018). 20H. S. Uhm, Y. C. Hong, and D. H. Shin, “A microwave plasma torch and its applications,” Plasma Sources Sci. Technol. 15, S26–S34 (2006). 21H. S. Uhm, J. H. Kim, and Y. C. Hong, “Disintegration of water molecules in a steam-plasma torch powered by microwaves,” Phys. Plasmas 14, 073502 (2007). 10, 055002-4PDF Image | Jet propulsion by microwave air plasma in the atmosphere
PDF Search Title:
Jet propulsion by microwave air plasma in the atmosphereOriginal File Name Searched:
jet-propulsion-microwave-air-plasma.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
| CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP |