PDF Publication Title:
Text from PDF Page: 022
The amount of power derived from this type of engine depends on a number of factors. There is no work done by either the intake or exhaust cycle, so half of the strokes of the engine do nothing to add to or subtract from the engine’s performance. The remaining strokes determine the work available from the engine. and creates more heat that must be dissipated. Some aircraft engines are air-cooled to save weight, and radial arrangements of cylinders as shown below allow for more cooling but increase drag. Others are water cooled, requiring the additional weight of a radiator and water. Raising the pressure in the cylinders creates more heat, stresses metal, and requires special fuel to prevent knocking. Engineers are always trying to maxi- mize the balance between the positive and negative forces in any processes. Radial engine. Also note that the Otto cycle to the left is labeled “ideal.” In actual operation, gasoline engines are in the range of 30 percent efficient because gases don’t burn instantly at constant volume, there are losses due to friction, and much of the heat generated goes to waste in the radiator and exhaust rather than to power. Piston Engines volume Constant volume process Adiabatic process Ideal Otto cycle. In an ideal Otto cycle, as shown on this diagram, the area enclosed between the compression stroke (2– 3) and the power stroke (4–5) is the work done by the engine. To increase the amount of work done this area needs to be made larger. Increasing the volume of the cylinder, having more cylinders, raising the pressure, decreasing the volume during compression, or forcing more air into the cylinder (supercharging) are all ways this can be accomplished. With aircraft engines these changes cause some problems. Increasing the num- ber or size of the cylinders adds weight to the engine 14PDF Image | NASA Guide to Engines
PDF Search Title:
NASA Guide to EnginesOriginal File Name Searched:
nasa-guide-to-engines.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP |