PDF Publication Title:
Text from PDF Page: 004
Good practice guide to heat pump installation Index of figures and tables 4 Figure 2.1 Figure 2.2 Figure 2.3 Figure 2.4 Figure 2.5 Figure 2.6 Table 2.1 Figure 2.7 Figure 2.8 Figure 2.9 Figure 2.10 Figure 2.11 Figure 3.1 Figure 3.2 Figure 3.3 Figure 3.4 Table 3.1 Table 4.1 Table 4.2 Figure 4.1 Figure 4.2 Figure 4.3 Figure 4.4 Figure 4.5 Table 4.3 Table 4.4 Table 4.5 Figure 4.6 Figure 4.7 Figure 4.8 Figure 4.9 Figure 4.10 Figure 4.11 Figure 4.12 Figure 6.1 Figure 6.2 Figure 6.3 Figure 6.4 Figure 6.5 Figure 6.6 Figure 6.7 Figure 6.8 Figure 6.9 Figure 6.10 Figure 6.11 Figure 6.12 Figure 6.13 Figure 6.14 Split system heat pump 8 Multi-split system heat pump 8 Ducted heat pump system 8 High wall-mounted unit 9 Ceiling cassette 9 Floor console 9 Heat pump components 10 Schematic diagram of reverse-cycle, air-to-air, split system heat pump operation (heating mode) 10 Schematic diagram of reverse-cycle, air-to-air, split system heat pump operation (cooling mode) 11 Schematic diagram of heat pump operation (heating) 11 Fixed-speed compressor operation 12 Inverter operation 12 Schematic of heat pump performance 13 New energy rating label from October 2009 for heat pumps/ air conditioners 14 ENERGY STAR® mark 14 Graphic representation of heat pump efficiency 14 Outdoor ambient temperature rating conditions 15 Designing a heat pump system 16 Effects of incorrectly sized systems 16 Floor-mounted unit – horizontal and vertical air discharge (heating) 18 Ceiling-mounted unit – horizontal air discharge (heating) 18 Ceiling-mounted unit – vertical air discharge (heating) 18 Wall/high wall-mounted unit – horizontal air discharge (cooling) 18 New Zealand climate zones (design temperature in oC) 19 Simple guide to determine heat load requirement 20 Heater sizer 21 Example of a heat pump performance guide chart 22 Outdoor unit clearances 23 Service access 23 Exchange cylinders, adequately ventilated, in storage or in use. 23 Locate the outdoor unit where a solid barrier can block the sound 24 Wall-mounted indoor unit clearances 24 Pre-install pipework before building claddings are installed 25 Permitted notching and drilling of timber framing allowed under NZS 3604 25 Twin-insulated and dehydrated pipe 27 Pipe opening facing down when cutting 28 Cover pipe ends 28 Pipe bender 28 Cut pipe with tube cutters 29 Remove all burrs 29 Place the flare nut over the pipe end 29 Flare the end of the tube (A) 29 Flare the end of the tube (B) 29 Flare the end of the tube (C) 29 Flare the end of the tube (D) 30 Apply oil to the back of the flared pipe and the flare joint 30 Connect the pipes (A) 30 Connect the pipes (B) 30PDF Image | Heat pump installation Good Practice Guide
PDF Search Title:
Heat pump installation Good Practice GuideOriginal File Name Searched:
Good_practice_heat_pump_installation.pdfDIY PDF Search: Google It | Yahoo | Bing
CO2 Organic Rankine Cycle Experimenter Platform The supercritical CO2 phase change system is both a heat pump and organic rankine cycle which can be used for those purposes and as a supercritical extractor for advanced subcritical and supercritical extraction technology. Uses include producing nanoparticles, precious metal CO2 extraction, lithium battery recycling, and other applications... More Info
Heat Pumps CO2 ORC Heat Pump System Platform More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)